VINCI, ANTONIO
VINCI, ANTONIO
Istituto di Scienza, Tecnologia e Sostenibilità per lo Sviluppo dei Materiali Ceramici - ISSMC (ex ISTEC)
Experimental characterization of fatigue life of ZrB2-SiC based ultra high-temperature ceramic matrix composites
2023 Reimer T.; Di Martino G.D.; Sciti D.; Zoli L.; Galizia P.; Vinci A.; Lagos M.A.; Azurmendi N.
Synthesis, microstructure and mechanical properties of lamellar YB2C2 - based ultra-high temperature ceramic composites
2023 Vinci, A; Zoli, L; Silvestroni, L; Gilli, N; Sciti, D
A systematic approach for horizontal and vertical scale up of sintered Ultra-High Temperature Ceramic Matrix Composites for aerospace-Advances
2022 Sciti, D; Zoli, L; Reimer, T; Vinci, A; Galizia, P
Advancements in carbon fibre reinforced ultra-refractory ceramic composites: Effect of rare earth oxides addition
2022 Vinci, Antonio; Silvestroni, Laura; Gilli, Nicola; Zoli, Luca; Sciti, Diletta
Ablation behaviour of carbon fibre ultra-high temperature composites at oblique angles of attack
2021 Baker, B; Venkatachalam, V; Zoli, L; Vinci, A; Failla, S; Sciti, D; Binner, J
Effect of PAN-based and pitch-based carbon fibres on microstructure and properties of continuous Cf/ZrB2-SiC UHTCMCs
2021 Sciti D.; Zoli L.; Vinci A.; Silvestroni L.; Mungiguerra S.; Galizia P.
Influence of pressure on the oxidation resistance of carbon fiber reinforced ZrB2/SiC composites at 2000 and 2200 degrees C
2021 Vinci A.; Reimer T.; Zoli L.; Sciti D.;
Properties of upscaled Ultra-High Temperature Ceramic Matrix Composites made by filament winding and spark plasma sintering
2021 Sciti, D; Galizia, P; Reimer, T; Schoberth, A; Gutierrez, C; Silvestroni, L; Vinci, A; Zoli, L
Retained strength of UHTCMCs after oxidation at 2278 K
2021 Galizia P.; Vinci A.; Zoli L.; Monteverde F.; Binner J.; Venkatachalam V.; Lagos M.A.; Reimer T.; Jain N.; Sciti D.
Significant improvement of the self-protection capability of ultra-high temperature ceramic matrix composites
2021 Servadei, F; Zoli, L; Vinci, A; Galizia, P; Sciti, D
Development of UHTCMCs via water based ZrB2 powder slurry infiltration and polymer infiltration and pyrolysis
2020 Servadei, Francesca; Zoli, Luca; Galizia, Pietro; Vinci, Antonio; Sciti, Diletta
Influence of Y2O3 addition on the mechanical and oxidation behaviour of carbon fibre reinforced ZrB2/SiC composites
2020 Vinci, Antonio; Zoli, Luca; Galizia, Pietro; Sciti, Diletta
Is spark plasma sintering suitable for the densification of continuous carbon fibre - UHTCMCs?
2020 Zoli, Luca; Vinci, Antonio; Galizia, Pietro; GutierrezGonzalez Carlos, F; Rivera, Sergio; Sciti, Diletta
Reactive melt infiltration of carbon fibre reinforced ZrB2/B composites with Zr2Cu
2020 Vinci, Antonio; Zoli, Luca; Galizia, Pietro; Kuetemeyer, Marius; Koch, Dietmar; Friess, Martin; Sciti, Diletta
Arc-jet wind tunnel characterization of ultra-high-temperature ceramic matrix composites
2019 Stefano Mungiguerra ; Giuseppe Di Martino ; Anselmo Cecere ; Raffaele Savino ; Laura Silvestroni ; Antonio Vinci ; Luca Zoli ; Diletta Sciti
Influence of fibre content on the strength of carbon fibre reinforced HfC/SiC composites up to 2100 degrees C
2019 Vinci, A; Zoli, L; Sciti, D; Watts, J; Hilmas, G E; Fahrenholtz, W G
Mechanical behaviour of carbon fibre reinforced TaC/SiC and ZrC/SiC composites up to 2100°C
2019 Vinci A.; Zoli L.; Sciti D.; Watts J.; Hilmas G. E.; Fahrenholtz W. G.
Toughening effect of non-periodic fiber distribution on crack propagation energy of UHTC composites
2019 Failla, S; Galizia, P; Zoli, L; Vinci, A; Sciti, D
Influence of SiC content on the oxidation of carbon fibre reinforced ZrB2/SiC composites at 1500 and 1650 degrees C in air
2018 Vinci, A; Zoli, L; Sciti, D
Introduction to H2020 project C3HARME - Next generation Ceramic Composites for Combustion Harsh Environment and space
2018 Sciti, D; Silvestroni, L; Monteverde, F; Vinci, A; Zoli, L