Silicon nitride-based ceramics were prepared by aqueous slip casting in plaster moulds. Two sintering cycles in air were used for sintering. The microstructures of the sintered specimens were observed by SEM. The flexural strength of selected samples was measured
Rapporto di attività 01/10 - Prove di resistenza alla frattura di materiali a base SION e risultati sul sistema D modificato
Esposito L;Sciti D;Silvestroni L;Bellosi A
2010
Abstract
Silicon nitride-based ceramics were prepared by aqueous slip casting in plaster moulds. Two sintering cycles in air were used for sintering. The microstructures of the sintered specimens were observed by SEM. The flexural strength of selected samples was measuredFile in questo prodotto:
Non ci sono file associati a questo prodotto.
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
