The wear behaviour of a monolithic alumina and an alumina-aluminium titanate laminated structure was studied. The laminate, containing surface fine grained alumina layers and internal composite layers with 10 vol.% of aluminium titanate, showed relatively low (~= 20MPa) compressive residual stresses at the surface. Interfaces between layers were constituted by large alumina grains (up to ~= 50um) that promoted toughening due to crack deflection and branching. Wear tests were performed on square specimens (30mm×30mm×6 mm) using the pin-on-disc method. The laminates showed higher wear resistance than the monolithic alumina. The analysis of the results together with SEM-EDX observations was performed to identify possible wear mechanisms. The wear resistance improvements are discussed in terms of the residual stresses in the laminate and the properties provided by the special microstructure of the interfaces

Improved wear behaviour of alumina-aluminium titanate laminates with low residual stresses and large grained interfaces

De Portu Goffredo;Melandri Cesare;
2011

Abstract

The wear behaviour of a monolithic alumina and an alumina-aluminium titanate laminated structure was studied. The laminate, containing surface fine grained alumina layers and internal composite layers with 10 vol.% of aluminium titanate, showed relatively low (~= 20MPa) compressive residual stresses at the surface. Interfaces between layers were constituted by large alumina grains (up to ~= 50um) that promoted toughening due to crack deflection and branching. Wear tests were performed on square specimens (30mm×30mm×6 mm) using the pin-on-disc method. The laminates showed higher wear resistance than the monolithic alumina. The analysis of the results together with SEM-EDX observations was performed to identify possible wear mechanisms. The wear resistance improvements are discussed in terms of the residual stresses in the laminate and the properties provided by the special microstructure of the interfaces
2011
Istituto di Scienza, Tecnologia e Sostenibilità per lo Sviluppo dei Materiali Ceramici - ISSMC (ex ISTEC)
Inglese
31
4
475
483
9
http://www.sciencedirect.com/science/article/pii/S0955221910005078
Microstructure
Wear resistance
Al2O3
Al2TiO5
Laminates
2
info:eu-repo/semantics/article
262
De Portu, Goffredo ; Melandri, Cesare ; Micele, Lorenzo ; Bueno, Salvador ; Baudin, Carmen
01 Contributo su Rivista::01.01 Articolo in rivista
none
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.14243/10847
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact