This research work deals with chlorite-vermiculite mixed-layer stability under hydrothermal and metamorphic conditions. We used as a case study a clayey flysh unit cropping out in an active geothermal area near to a Recent volcano (Mt. Amiata) in central Italy. The geothermal gradient is higher than the world average and temperatures over 100ºC can occur at less than 1 km depth. The mineralogical data, obtained from X-Ray Power Diffraction (XRPD) analysis of clay samples from the same geologic unit, show that the primary anchimetamorphic mineral assemblage (illite, chlorite, illite-smectite mixed layers) is accompanied by secondary phases, such as chloritevermiculite mixed-layers and calcite. Reactive flow modelling was used to outline a realistic water-rock (W/R) interaction process able to generate the new minerals. In the numerical simulation, the pristine shale was made to react with a local thermal spring, at an estimated but realistic carbonate reservoir temperature. The simulation predicts that, at a temperature of 120ºC, clinochlore dissolves and vermiculite crystallizes, a good proxy of the chlorite-vermiculite crystallization process. Under low water/rock conditions the proportions of the clay minerals (illite, chlorite, smectite and vermiculite) are comparable with the analytical results. The simulation also shows that temperatures higher than 120ºC enhance the vermiculite formation. We conclude that the chlorite-vermiculite mixed-layers formed in the recent past due to the upflow of thermal water which permeated the flysch unit. This result indicates that the alteration of the clayey cap-rocks of geothermal reservoirs is enhanced by the interaction with geothermal fluids, and can be used as a prospecting tool.
Alteration of clay minerals in a sedimentary caprock and its use in geothermal prospecting: an example from Mt. Amiata
Battaglia S;Gherardi F;Gianelli G;
2013
Abstract
This research work deals with chlorite-vermiculite mixed-layer stability under hydrothermal and metamorphic conditions. We used as a case study a clayey flysh unit cropping out in an active geothermal area near to a Recent volcano (Mt. Amiata) in central Italy. The geothermal gradient is higher than the world average and temperatures over 100ºC can occur at less than 1 km depth. The mineralogical data, obtained from X-Ray Power Diffraction (XRPD) analysis of clay samples from the same geologic unit, show that the primary anchimetamorphic mineral assemblage (illite, chlorite, illite-smectite mixed layers) is accompanied by secondary phases, such as chloritevermiculite mixed-layers and calcite. Reactive flow modelling was used to outline a realistic water-rock (W/R) interaction process able to generate the new minerals. In the numerical simulation, the pristine shale was made to react with a local thermal spring, at an estimated but realistic carbonate reservoir temperature. The simulation predicts that, at a temperature of 120ºC, clinochlore dissolves and vermiculite crystallizes, a good proxy of the chlorite-vermiculite crystallization process. Under low water/rock conditions the proportions of the clay minerals (illite, chlorite, smectite and vermiculite) are comparable with the analytical results. The simulation also shows that temperatures higher than 120ºC enhance the vermiculite formation. We conclude that the chlorite-vermiculite mixed-layers formed in the recent past due to the upflow of thermal water which permeated the flysch unit. This result indicates that the alteration of the clayey cap-rocks of geothermal reservoirs is enhanced by the interaction with geothermal fluids, and can be used as a prospecting tool.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.