Amorphous (a-C) Carbon thin films were deposited, using pulsed laser deposition (PLD) with a Nd:YAG laser (1064 nm, 7 ns), from a pyrolytic graphite target, on left angle bracket1 0 0right-pointing angle bracket silicon and refractory metal (Mo) substrates to a film thickness of 55, 400 and 500 nm. Samples were grown at RT and then annealed by a laser annealing technique, to reduce residual stress and induce a locally confined graphitization process. The films were exposed to irradiation, in vacuum, by a Nd:YAG pulsed laser, operating at different wavelengths (VIS, N-UV) and increasing values of energy from 6100 mJ/pulse. The thinner films were completely destroyed by N-UV laser treatment also at lower energies, owing to the almost direct propagation of heat to the Si substrate with melting and ruinous blistering effects. For thicker films the Raman micro-analysis evidenced the influence of laser treatments on the sp3/sp2 content evolution, and established the formation of aromatic nano-structures of average dimension 4.1÷4.7 nm (derived from the ID/IG peak ratio), at fluence values round 50 mJ/cm2 for N-UV and 165 mJ/cm2 for VIS laser irradiation. Higher fluences were not suitable for a-Carbon graphitization, since a strong ablation process was the prominent effect of irradiation. Grazing incidence XRD (GI-XRD) used to evaluate the dimension and texturing of nano-particles confirmed the findings of Raman analysis. The effects of irradiation on surface morphology were studied by SEM analysis.
Laser annealing of amorphous carbon films
Cappelli E;
2008
Abstract
Amorphous (a-C) Carbon thin films were deposited, using pulsed laser deposition (PLD) with a Nd:YAG laser (1064 nm, 7 ns), from a pyrolytic graphite target, on left angle bracket1 0 0right-pointing angle bracket silicon and refractory metal (Mo) substrates to a film thickness of 55, 400 and 500 nm. Samples were grown at RT and then annealed by a laser annealing technique, to reduce residual stress and induce a locally confined graphitization process. The films were exposed to irradiation, in vacuum, by a Nd:YAG pulsed laser, operating at different wavelengths (VIS, N-UV) and increasing values of energy from 6100 mJ/pulse. The thinner films were completely destroyed by N-UV laser treatment also at lower energies, owing to the almost direct propagation of heat to the Si substrate with melting and ruinous blistering effects. For thicker films the Raman micro-analysis evidenced the influence of laser treatments on the sp3/sp2 content evolution, and established the formation of aromatic nano-structures of average dimension 4.1÷4.7 nm (derived from the ID/IG peak ratio), at fluence values round 50 mJ/cm2 for N-UV and 165 mJ/cm2 for VIS laser irradiation. Higher fluences were not suitable for a-Carbon graphitization, since a strong ablation process was the prominent effect of irradiation. Grazing incidence XRD (GI-XRD) used to evaluate the dimension and texturing of nano-particles confirmed the findings of Raman analysis. The effects of irradiation on surface morphology were studied by SEM analysis.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
