This paper provides an analysis of contributions to the apparent, reversing heat capacity when measured by temperaturemodulated differential scanning analysis (TMDSC) with an underlying heating rate in the temperature range where irreversible transitions with latent heats occur. To deconvolute the data of a TMDSC scan into a total and reversing part, it is common practice to use the sliding averages and the first harmonics of the Fourier series of temperature and heat-flowrate. Under certain conditions, this procedure produces erroneous reversing contributions which are detailed by experiment and simulation. Unless the response to the temperature modulation is linear, the total heat-flowrate is stationary, and the transition is truly reversible and occurs only once during the temperature scan, one cannot expect a true deconvolution of total and reversible effects. In the presence of multiple, irreversible transitions within a modulation period, however, each process involving latent heat can increase the modulation amplitude, as demonstrated by computer-simulation of polymer melting. As a result, the multiple transitions may give erroneously high latent heats when integrating the apparent reversing heat capacity with respect to temperature.
This paper provides an analysis of contributions to the apparent, reversing heat capacity when measured by temperature-modulated differential scanning analysis (TMDSC) with an underlying heating rate in the temperature range where irreversible transitions with latent heats occur. To deconvolute the data of a TMDSC scan into a total and reversing part, it is common practice to use the sliding averages and the first harmonics of the Fourier series of temperature and heat-flow rate. Under certain conditions, this procedure produces erroneous reversing contributions which are detailed by experiment and simulation. Unless the response to the temperature modulation is linear, the total heat-flow rate is stationary, and the transition is truly reversible and occurs only once during the temperature scan, one cannot expect a true deconvolution of total and reversible effects. In the presence of multiple, irreversible transitions within a modulation period, however, each process involving latent heat can increase the modulation amplitude, as demonstrated by computer-simulation of polymer melting. As a result, the multiple transitions may give erroneously high latent heats when integrating the apparent reversing heat capacity with respect to temperature.
Melting of Polymers by Non-isothermal, Temperature-modulated Calorimetry: Analysis of Various Irreversible Latent Heat Contributions to the Reversing Heat Capacity
M L Di Lorenzo;
2003
Abstract
This paper provides an analysis of contributions to the apparent, reversing heat capacity when measured by temperature-modulated differential scanning analysis (TMDSC) with an underlying heating rate in the temperature range where irreversible transitions with latent heats occur. To deconvolute the data of a TMDSC scan into a total and reversing part, it is common practice to use the sliding averages and the first harmonics of the Fourier series of temperature and heat-flow rate. Under certain conditions, this procedure produces erroneous reversing contributions which are detailed by experiment and simulation. Unless the response to the temperature modulation is linear, the total heat-flow rate is stationary, and the transition is truly reversible and occurs only once during the temperature scan, one cannot expect a true deconvolution of total and reversible effects. In the presence of multiple, irreversible transitions within a modulation period, however, each process involving latent heat can increase the modulation amplitude, as demonstrated by computer-simulation of polymer melting. As a result, the multiple transitions may give erroneously high latent heats when integrating the apparent reversing heat capacity with respect to temperature.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
