In the last years multilayer mirrors for applications in the extreme ultra-violet (ELTV) region have reached high reflectivity performances, leading such optics suitable for new generation lithography and astrophysical applications. One of the most studied systems is the Mo/Si but a still challenging task is the study of the interfaces. This work aims to use the X-ray absorption spectroscopy technique assisted by standing wave (SW-XAS) as a way to investigate interface composition. Samples consisted in 10-periods Mo/Si multilayers deposited on silicon substrates by RF magnetron sputtering heat treated at temperatures between 240 degrees C and 600 degrees C. The study shows a difference in the results from SW-XAS spectra collected in different positions of the standing wave and reveal the presence of molybdenum silicide (MoSi2) at the interfaces. The comparison of SW-XAS data with simulations based on X-ray reflectivity data show that the two interfaces are asymmetric. Significant structural changes are observed increasing the annealing temperature and the MoSi, percentage rise from 14% (as deposited) to 70% (600 degrees C). (c) 2005 Elsevier B.V. All rights reserved.
Characterization of thermally treated Mo/Si multilayer mirrors with standing wave-assisted EXAFS
D'Acapito F;
2006
Abstract
In the last years multilayer mirrors for applications in the extreme ultra-violet (ELTV) region have reached high reflectivity performances, leading such optics suitable for new generation lithography and astrophysical applications. One of the most studied systems is the Mo/Si but a still challenging task is the study of the interfaces. This work aims to use the X-ray absorption spectroscopy technique assisted by standing wave (SW-XAS) as a way to investigate interface composition. Samples consisted in 10-periods Mo/Si multilayers deposited on silicon substrates by RF magnetron sputtering heat treated at temperatures between 240 degrees C and 600 degrees C. The study shows a difference in the results from SW-XAS spectra collected in different positions of the standing wave and reveal the presence of molybdenum silicide (MoSi2) at the interfaces. The comparison of SW-XAS data with simulations based on X-ray reflectivity data show that the two interfaces are asymmetric. Significant structural changes are observed increasing the annealing temperature and the MoSi, percentage rise from 14% (as deposited) to 70% (600 degrees C). (c) 2005 Elsevier B.V. All rights reserved.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
