The use of narrow band gap semiconductors such as PbS may expand the light absorption range to the near-infrared region in quantum-dot-sensitized solar cells (QDSCs), increasing the generated photocurrent. However, the application of PbS as a sensitizer in QDSCs causes some problems of stability and high recombination. Here, we show that the direct growth of a CdS coating layer on previously deposited PbS by the simple method of successive ionic layer adsorption and reaction (SILAR) minimizes these problems. A remarkable short-circuit current density for PbS/CdS QDSCs is demonstrated, ~11 mA/cm 2, compared to that of PbS QDSCs, with photocurrents lower than 4 mA/cm 2, using polysulfide electrolyte in both cells. The cell efficiency reached a promising 2.21% under 1 sun of simulated irradiation (AM1.5G, 100 mW/cm 2). Enhancement of the solar cell performance beyond the arithmetic addition of the efficiencies of the single constituents (PbS and CdS) is demonstrated for the nanocomposite PbS/CdS configuration. PbS dramatically increases the obtained photocurrents, and the CdS coating stabilizes the solar cell behavior. © 2011 American Chemical Society.

Panchromatic sensitized solar cells based on metal sulfide quantum dots grown directly on nanostructured TiO 2 electrodes

Vomiero;
2011

Abstract

The use of narrow band gap semiconductors such as PbS may expand the light absorption range to the near-infrared region in quantum-dot-sensitized solar cells (QDSCs), increasing the generated photocurrent. However, the application of PbS as a sensitizer in QDSCs causes some problems of stability and high recombination. Here, we show that the direct growth of a CdS coating layer on previously deposited PbS by the simple method of successive ionic layer adsorption and reaction (SILAR) minimizes these problems. A remarkable short-circuit current density for PbS/CdS QDSCs is demonstrated, ~11 mA/cm 2, compared to that of PbS QDSCs, with photocurrents lower than 4 mA/cm 2, using polysulfide electrolyte in both cells. The cell efficiency reached a promising 2.21% under 1 sun of simulated irradiation (AM1.5G, 100 mW/cm 2). Enhancement of the solar cell performance beyond the arithmetic addition of the efficiencies of the single constituents (PbS and CdS) is demonstrated for the nanocomposite PbS/CdS configuration. PbS dramatically increases the obtained photocurrents, and the CdS coating stabilizes the solar cell behavior. © 2011 American Chemical Society.
2011
CdS
Cell behaviors
Cell efficiency
Coating layer
Direct growth
Metal sulfides
Nanostructured TiO
Narrow band gap
Near infrared region
Quantum Dot
Quantum dots
SIMPLE method
Solar cell performance
Successive ionic layer adsorption and reactions
Adsorption
Cadmium compounds
Cadmium sulfide
Coatings
Nanocomposites
Photocurrents
Polysulfides
Semiconductor growth
Semiconductor quantum dots
Semiconductor quantum wells
Solar cells
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.14243/20545
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 257
  • ???jsp.display-item.citation.isi??? ND
social impact