A design analysis is given for a bolometric infrared detector that uses the resistive transition of a high-temperature superconductor as the temperature sensing element, and liquid nitrogen (LN) as the coolant. It is shown that for highly oriented c-axis films, the measured low-frequency noise causes little or no degradation of the performance. With the incoming radiation chopped at 10 Hz, noise equivalent powers (NEP) in the range (1-20)× 10-12 W Hz-1/2 should be achievable. These values compare favorably with the NEP of ...
Feasibility of the high Tc superconducting bolometer
Leoni R;
1989
Abstract
A design analysis is given for a bolometric infrared detector that uses the resistive transition of a high-temperature superconductor as the temperature sensing element, and liquid nitrogen (LN) as the coolant. It is shown that for highly oriented c-axis films, the measured low-frequency noise causes little or no degradation of the performance. With the incoming radiation chopped at 10 Hz, noise equivalent powers (NEP) in the range (1-20)× 10-12 W Hz-1/2 should be achievable. These values compare favorably with the NEP of ...File in questo prodotto:
Non ci sono file associati a questo prodotto.
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
