This paper deals with the conceptual design of an additional adaptronic device for machine tools. This novel module is based on piezoelectric actuators and flexures and it can be used to compensate quasi-static system deflection caused by the cutting forces. The active module was design exploiting a mechatronic model of the overall system, moreover including the model of the milling process. The active module prototype was assembled on a real machine centre and some preliminary experimental tests were also performed.
An active system for compensation of mill deflection
Giacomo Bianchi
2012
Abstract
This paper deals with the conceptual design of an additional adaptronic device for machine tools. This novel module is based on piezoelectric actuators and flexures and it can be used to compensate quasi-static system deflection caused by the cutting forces. The active module was design exploiting a mechatronic model of the overall system, moreover including the model of the milling process. The active module prototype was assembled on a real machine centre and some preliminary experimental tests were also performed.File in questo prodotto:
| File | Dimensione | Formato | |
|---|---|---|---|
|
prod_286771-doc_82310.pdf
solo utenti autorizzati
Descrizione: An active system for compensation of mill deflection
Dimensione
981.75 kB
Formato
Adobe PDF
|
981.75 kB | Adobe PDF | Visualizza/Apri Richiedi una copia |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
