The oxygen reduction process in polymer electrolyte fuel cells (PEMFCs) was in-situ investigated at intermediate temperatures (80 degrees-130 degrees C) by using a carbon supported PtCo catalyst and Nafion membrane as electrolyte. To overcome the Nafion dehydration above 100 degrees C, the experiments were carried out under pressurized conditions. Electro-kinetic parameters such as reaction order and activation energy were determined from the steady-state galvanostatic polarization curves obtained for the PEM single cell. Negative activation energies of 40 kJ mol(-1) and 18 kJ mol(-1) were observed at 0.9 V and 0.65 V, respectively, in the temperature range 100 degrees-130 degrees C. This was a consequence of ionomer and membrane dry-out. The ionomer dry-out effect appears to depress reaction kinetics as the temperature increases above 100 degrees C since the availability of protons at the catalyst -electrolyte interface is linked to the presence of proper water contents. An oxygen reduction reaction of the first order with respect to the oxygen partial pressure was determined at low current densities. Maximum power densities of 990 mW cm(-2) and 780 mW cm(-2) at 100 degrees C and 110 degrees C (H-2-O-2) with 100% R.H., were achieved at 3 bars abs. Copyright (C) 2012, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

An electro-kinetic study of oxygen reduction in polymer electrolyte fuel cells at intermediate temperatures

Gatto I;Stassi A;Passalacqua E;
2013

Abstract

The oxygen reduction process in polymer electrolyte fuel cells (PEMFCs) was in-situ investigated at intermediate temperatures (80 degrees-130 degrees C) by using a carbon supported PtCo catalyst and Nafion membrane as electrolyte. To overcome the Nafion dehydration above 100 degrees C, the experiments were carried out under pressurized conditions. Electro-kinetic parameters such as reaction order and activation energy were determined from the steady-state galvanostatic polarization curves obtained for the PEM single cell. Negative activation energies of 40 kJ mol(-1) and 18 kJ mol(-1) were observed at 0.9 V and 0.65 V, respectively, in the temperature range 100 degrees-130 degrees C. This was a consequence of ionomer and membrane dry-out. The ionomer dry-out effect appears to depress reaction kinetics as the temperature increases above 100 degrees C since the availability of protons at the catalyst -electrolyte interface is linked to the presence of proper water contents. An oxygen reduction reaction of the first order with respect to the oxygen partial pressure was determined at low current densities. Maximum power densities of 990 mW cm(-2) and 780 mW cm(-2) at 100 degrees C and 110 degrees C (H-2-O-2) with 100% R.H., were achieved at 3 bars abs. Copyright (C) 2012, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.
2013
Istituto di Tecnologie Avanzate per l'Energia - ITAE
Oxygen reduction reaction
Polymer electrolyte fuel cell
Pt-Co electrocatalyst
Intermediate temperature
Automotive
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.14243/260890
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact