Membranes based on a new sulfonated polysulfone co-polymer having a pending lactone cardo group in one of the structural units were characterized by ion-exchange capacity, water-up take, thermogravimetric analysis and differential scanning calorimetry. This sulfonated polysulfone co-polymer is characterized by a low glass transition temperature (138degreesC). Single cell tests in H-2/air fuel cells configuration at 30 and 60degreesC have shown for 120 mum membranes power densities of 140 and 210 mWcm(-2) respectively. A stable time performance was measured up to 250 hours.
New sulfonated polysulfone co-polymer membrane for low temperature fuel cells
Pedicini RCo-primo
Relatore esterno
;Gatto I;Passalacqua E
2003
Abstract
Membranes based on a new sulfonated polysulfone co-polymer having a pending lactone cardo group in one of the structural units were characterized by ion-exchange capacity, water-up take, thermogravimetric analysis and differential scanning calorimetry. This sulfonated polysulfone co-polymer is characterized by a low glass transition temperature (138degreesC). Single cell tests in H-2/air fuel cells configuration at 30 and 60degreesC have shown for 120 mum membranes power densities of 140 and 210 mWcm(-2) respectively. A stable time performance was measured up to 250 hours.File in questo prodotto:
| File | Dimensione | Formato | |
|---|---|---|---|
|
prod_289466-doc_83249.pdf
accesso aperto
Descrizione: New Sulfonated Polysulfone Co-Polymer Membrane for Low Temperature Fuel Cells
Licenza:
NON PUBBLICO - Accesso privato/ristretto
Dimensione
105.78 kB
Formato
Adobe PDF
|
105.78 kB | Adobe PDF | Visualizza/Apri |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
