The objective of this study is to present an optical chemical sensor based on surface plasmon resonance (SPR) in a plastic optical fiber (POF) for the selective detection and analysis of trinitrotoluene (TNT) in aqueous solution. The fabricated optical chemical sensor was realized removing the cladding of a plastic optical fiber along half the circumference, spin coating on the exposed core a buffer of Microposit S1813 photoresist, and finally sputtering a thin gold film. A molecularly imprinted polymer (MIP) film was, then, deposited on the thin gold film to allow the selective detection of TNT. The film was a methacrylic acid-divinyl benzene copolymer obtained by radicalic polymerization at high temperature. The experimental results show that the use of MIP layer is suitable for highly selective detection of TNT, down to about 50 ?M (i.e. ~11 ?g/ml). This shows that the direct detection of a low molecular mass substance is possible by SPR transduction, even at low concentration. Furthermore, the proposed sensing head is low cost and relatively easy to realize, and may be very attractive for the detection and analysis of trinitrotoluene (TNT), in particular considering that it does not involve the use of any electrical devices and it can be used for remote/online monitoring exploiting, f.i., a fiber optic link. © 2013 Elsevier B.V.

Sensors based on surface plasmon resonance in a plastic optical fiber for the detection of trinitrotoluene

Zeni L
2013

Abstract

The objective of this study is to present an optical chemical sensor based on surface plasmon resonance (SPR) in a plastic optical fiber (POF) for the selective detection and analysis of trinitrotoluene (TNT) in aqueous solution. The fabricated optical chemical sensor was realized removing the cladding of a plastic optical fiber along half the circumference, spin coating on the exposed core a buffer of Microposit S1813 photoresist, and finally sputtering a thin gold film. A molecularly imprinted polymer (MIP) film was, then, deposited on the thin gold film to allow the selective detection of TNT. The film was a methacrylic acid-divinyl benzene copolymer obtained by radicalic polymerization at high temperature. The experimental results show that the use of MIP layer is suitable for highly selective detection of TNT, down to about 50 ?M (i.e. ~11 ?g/ml). This shows that the direct detection of a low molecular mass substance is possible by SPR transduction, even at low concentration. Furthermore, the proposed sensing head is low cost and relatively easy to realize, and may be very attractive for the detection and analysis of trinitrotoluene (TNT), in particular considering that it does not involve the use of any electrical devices and it can be used for remote/online monitoring exploiting, f.i., a fiber optic link. © 2013 Elsevier B.V.
2013
Istituto per il Rilevamento Elettromagnetico dell'Ambiente - IREA
Molecularly imprinted polymers
Optical biosensor
Plastic optical fiber
Surface plasmon resonance
Trinitrotoluene
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.14243/271391
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 128
  • ???jsp.display-item.citation.isi??? ND
social impact