The METIS coronagraph aboard the Solar Orbiter mission will undergo extreme environmental conditions (e.g., a thermal excursion of about 350 degrees throughout the various mission phases), due to the peculiar spacecraft trajectory that will reach a perihelion of 0.28 AUs. METIS is characterized by an innovative design for the occultation system that allows to halve the thermal load inside the instrument while guaranteeing the stray light reduction that is required for a solar coronagraph. The Inverted External Occulter (IEO) concept revolutionizes the classical scheme, by exchanging the usual positions of the entrance aperture (that is now the outermost element of the instrument facing the Sun) with the actual occulter (that is a spherical mirror inside the coronagraph boom). The chosen material for the IEO manufacturing is Titanium, as a trade o_ between light weight, strength and low thermal expansion coefficient. A 2 years long test campaign has been run to define the IEO geometry, and its results are addressed in previous dedicated papers. This work describes the results of a further campaign aimed at defining the IEO surface and edge finishing, the support flange geometry and the Titanium coating. Various edge finishing were installed on a prototype of the instrument occulting system and their performance in stray light reduction were compared. The support flange geometry was designed in order to reduce the overall weight, to control the thermal load and to accentuate its stray light suppression performance. The coating is a particularly delicate issue. A black coating is necessary in order to assess the stray light issues, typically critical for visible coronagraphs. Black coating of Titanium is not a standard process, thus several space qualified black coatings were experimented on Titanium and characterized. The impact of the IEO coatings was evaluated, the reflectivity and the BRDFs were measured and are addressed in the paper.

Coating and surface finishing definition for the Solar Orbiter/METIS inverted external occulter

V Da Deppo;
2014

Abstract

The METIS coronagraph aboard the Solar Orbiter mission will undergo extreme environmental conditions (e.g., a thermal excursion of about 350 degrees throughout the various mission phases), due to the peculiar spacecraft trajectory that will reach a perihelion of 0.28 AUs. METIS is characterized by an innovative design for the occultation system that allows to halve the thermal load inside the instrument while guaranteeing the stray light reduction that is required for a solar coronagraph. The Inverted External Occulter (IEO) concept revolutionizes the classical scheme, by exchanging the usual positions of the entrance aperture (that is now the outermost element of the instrument facing the Sun) with the actual occulter (that is a spherical mirror inside the coronagraph boom). The chosen material for the IEO manufacturing is Titanium, as a trade o_ between light weight, strength and low thermal expansion coefficient. A 2 years long test campaign has been run to define the IEO geometry, and its results are addressed in previous dedicated papers. This work describes the results of a further campaign aimed at defining the IEO surface and edge finishing, the support flange geometry and the Titanium coating. Various edge finishing were installed on a prototype of the instrument occulting system and their performance in stray light reduction were compared. The support flange geometry was designed in order to reduce the overall weight, to control the thermal load and to accentuate its stray light suppression performance. The coating is a particularly delicate issue. A black coating is necessary in order to assess the stray light issues, typically critical for visible coronagraphs. Black coating of Titanium is not a standard process, thus several space qualified black coatings were experimented on Titanium and characterized. The impact of the IEO coatings was evaluated, the reflectivity and the BRDFs were measured and are addressed in the paper.
2014
Istituto di fotonica e nanotecnologie - IFN
9780819496195
Solar coronagraph
external occulter
stray light
coating
Titanium blackening
BRDF
Solar Or- biter
METIS
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.14243/271650
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact