Objects of this study are the wooden artifacts discovered in the archaeological excavation of Mephitis goddess sanctuary in the Ansanto Valley (Rocca San Felice - AV, Southern Italy). At the moment of discovery, in the mid of last century, woods were waterlogged and mineralized, and they were restored to allow their preservation. Purpose of this work was the wood identification, in order to gain information on some technological aspects, and the analysis of wood preservation state. Wood species were identified by means ofmagnifiers or optical and scanning electron microscopes, while the state of preservation was studied through microscopy and chemical analyses (FTIR-ATR, ash content and pH measurement). Four different taxa have been identified with certainty among all the findings: Quercus sp., FagussylvaticaL., Rosaceae,Populus/Salix. It was not possible to identify the wood of all the findings, because some sampled fragments were too small or because of the deformation of wood tissues.The state of preservation showed a great variability over the analyzed findings. A general damage is present, visible also macroscopically. The polarized light microscope and FTIR-ATRspectroscopy demonstrated the absence of cellulose in the analyzed samples. The wood cell wall is not visible by means of SEM because it is completely covered by restoration material. Because of the lack of visibility, it was impossible to identify the type of biological damage occurred to the wood.

Anatomical and chemical analyses on wooden artifacts from a Samnite sanctuary in Hirpinia (Southern Italy)

Capretti C;Pizzo B;Macchioni N
2015

Abstract

Objects of this study are the wooden artifacts discovered in the archaeological excavation of Mephitis goddess sanctuary in the Ansanto Valley (Rocca San Felice - AV, Southern Italy). At the moment of discovery, in the mid of last century, woods were waterlogged and mineralized, and they were restored to allow their preservation. Purpose of this work was the wood identification, in order to gain information on some technological aspects, and the analysis of wood preservation state. Wood species were identified by means ofmagnifiers or optical and scanning electron microscopes, while the state of preservation was studied through microscopy and chemical analyses (FTIR-ATR, ash content and pH measurement). Four different taxa have been identified with certainty among all the findings: Quercus sp., FagussylvaticaL., Rosaceae,Populus/Salix. It was not possible to identify the wood of all the findings, because some sampled fragments were too small or because of the deformation of wood tissues.The state of preservation showed a great variability over the analyzed findings. A general damage is present, visible also macroscopically. The polarized light microscope and FTIR-ATRspectroscopy demonstrated the absence of cellulose in the analyzed samples. The wood cell wall is not visible by means of SEM because it is completely covered by restoration material. Because of the lack of visibility, it was impossible to identify the type of biological damage occurred to the wood.
2015
Istituto per la Valorizzazione del Legno e delle Specie Arboree - IVALSA - Sede Sesto Fiorentino
wooden artifacts
optical microscope
SEM
FTIR-ATR spectroscopy
pH measurement
ash content
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.14243/298645
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 15
  • ???jsp.display-item.citation.isi??? ND
social impact