Attenzione: i dati modificati non sono ancora stati salvati. Per confermare inserimenti o cancellazioni di voci è necessario confermare con il tasto SALVA/INSERISCI in fondo alla pagina
CNR Institutional Research Information System
In this paper, we report a method for the simultaneous extraction, purification, separation, identification and quantification of ergosterol, mannitol and arabitol as biomarkers of fungal spores in bioaerosol particles. After sampling by a low volume sampler, filters were spiked with mannitol-C-13 and dehydrocholesterol as internal standards. Samples were then extracted by accelerated solvent extraction using pure ethanol. The extract was then passed through an amino cartridge and divided in two parts: the apolar fraction, released from the cartridge, was subjected to liquid liquid extraction (by n-hexane), while polar compounds, retained by the cartridge, were eluted by a mixture of methanol-water. The two fractions were joined and analyzed by HPLC equipped with two different columns in series, and coupled to a triple-quadrupole mass spectrometer with Atmospheric Pressure Chemical Ionization source. In addition, the same fractions were analyzed, after derivatization, by GC-MS. The results obtained by the two techniques were finally compared, showing good agreement between them.
Airborne microorganisms, as bacteria and fungi, are ubiquitous components of the atmospheric aerosol particles.
Extraction and analysis of fungal spore biomarkers in atmospheric bioaerosol by HPLC-MS-MS and GC-MS
In this paper, we report a method for the simultaneous extraction, purification, separation, identification and quantification of ergosterol, mannitol and arabitol as biomarkers of fungal spores in bioaerosol particles. After sampling by a low volume sampler, filters were spiked with mannitol-C-13 and dehydrocholesterol as internal standards. Samples were then extracted by accelerated solvent extraction using pure ethanol. The extract was then passed through an amino cartridge and divided in two parts: the apolar fraction, released from the cartridge, was subjected to liquid liquid extraction (by n-hexane), while polar compounds, retained by the cartridge, were eluted by a mixture of methanol-water. The two fractions were joined and analyzed by HPLC equipped with two different columns in series, and coupled to a triple-quadrupole mass spectrometer with Atmospheric Pressure Chemical Ionization source. In addition, the same fractions were analyzed, after derivatization, by GC-MS. The results obtained by the two techniques were finally compared, showing good agreement between them.
Arabitol Ergosterol Mannitol HPLC tandem mass spectrometry GC-MS
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.14243/300005
Citazioni
ND
ND
23
social impact
Conferma cancellazione
Sei sicuro che questo prodotto debba essere cancellato?
simulazione ASN
Il report seguente simula gli indicatori relativi alla propria produzione scientifica in relazione alle soglie ASN 2023-2025 del proprio SC/SSD. Si ricorda che il superamento dei valori soglia (almeno 2 su 3) è requisito necessario ma non sufficiente al conseguimento dell'abilitazione. La simulazione si basa sui dati IRIS e sugli indicatori bibliometrici alla data indicata e non tiene conto di eventuali periodi di congedo obbligatorio, che in sede di domanda ASN danno diritto a incrementi percentuali dei valori. La simulazione può differire dall'esito di un’eventuale domanda ASN sia per errori di catalogazione e/o dati mancanti in IRIS, sia per la variabilità dei dati bibliometrici nel tempo. Si consideri che Anvur calcola i valori degli indicatori all'ultima data utile per la presentazione delle domande.
La presente simulazione è stata realizzata sulla base delle specifiche raccolte sul tavolo ER del Focus Group IRIS coordinato dall'Università di Modena e Reggio Emilia e delle regole riportate nel DM 589/2018 e allegata Tabella A. Cineca, l'Università di Modena e Reggio Emilia e il Focus Group IRIS non si assumono alcuna responsabilità in merito all’uso che il diretto interessato o terzi faranno della simulazione. Si specifica inoltre che la simulazione contiene calcoli effettuati con dati e algoritmi di pubblico dominio e deve quindi essere considerata come un mero ausilio al calcolo svolgibile manualmente o con strumenti equivalenti.