a-Cellulose was pyrolyzed using a multimode microwave oven, different microwave absorbers and experimental set ups. The microwave absorber showed a strong influence: carbon gave a large gasifi- cation of cellulose (yield of gas up to 53.8%) while Al2 O3 gave a high yield of bio-char (64.1%) and a low gas production (3.0%). Bio-oil was obtained with the highest yield (37.6%) using iron as microwave absorber and a condenser between the oven and the collecting system. Dark brown bio-oils having low density and viscosity due to the presence of large amount of furanosidic compounds were collected. Bio-oils were characterized through GC-MS, FT-IR, NMR, The GC-MS analysis was employed to evalu- ate the composition of bio-oils using calculated retention factors. A high concentration of levoglucosan (133.9 mg/mL) together with acetic acid, acetic anhydride, 1-hydroxy-2-propanone, formic acid and fur- fural were obtained using graphite as microwave absorber. A mechanisms was proposed to rationalize the formation of aromatic compounds present in bio-oils. Water contents in bio-oils were affected by all parameters of the process, mainly by the microwave absorber. The use of silica has proved to be a promising way to obtain bio-oil with low water content (13%), while pyrolysis in the presence of carbon gave a large amount of water (46%).
Pyrolysis of alpha-cellulose using a multimode microwave oven
Giovannelli A;
2016
Abstract
a-Cellulose was pyrolyzed using a multimode microwave oven, different microwave absorbers and experimental set ups. The microwave absorber showed a strong influence: carbon gave a large gasifi- cation of cellulose (yield of gas up to 53.8%) while Al2 O3 gave a high yield of bio-char (64.1%) and a low gas production (3.0%). Bio-oil was obtained with the highest yield (37.6%) using iron as microwave absorber and a condenser between the oven and the collecting system. Dark brown bio-oils having low density and viscosity due to the presence of large amount of furanosidic compounds were collected. Bio-oils were characterized through GC-MS, FT-IR, NMR, The GC-MS analysis was employed to evalu- ate the composition of bio-oils using calculated retention factors. A high concentration of levoglucosan (133.9 mg/mL) together with acetic acid, acetic anhydride, 1-hydroxy-2-propanone, formic acid and fur- fural were obtained using graphite as microwave absorber. A mechanisms was proposed to rationalize the formation of aromatic compounds present in bio-oils. Water contents in bio-oils were affected by all parameters of the process, mainly by the microwave absorber. The use of silica has proved to be a promising way to obtain bio-oil with low water content (13%), while pyrolysis in the presence of carbon gave a large amount of water (46%).I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
