The development of sensitive cryogenic light detectors is of primary interest for bolometric experiments searching for rare events like dark matter interactions or neutrino-less double beta decay. Thanks to their good energy resolution and the natural multiplexed read-out, Kinetic Inductance Detectors (KIDs) are particularly suitable for this purpose. To efficiently couple KIDs-based light detectors to the large crystals used by the most advanced bolometric detectors, active surfaces of several cm<sup>2</sup> are needed. For this reason, we are developing phonon-mediated detectors. In this paper, we present the results obtained with a prototype consisting of four 40 nm thick aluminum resonators patterned on a 2 × 2 cm<sup>2</sup> silicon chip, and calibrated with optical pulses and X-rays. The detector features a noise resolution ?<inf>E</inf> = 154 ± 7 eV and an (18 ± 2)% efficiency.
Energy resolution and efficiency of phonon-mediated kinetic inductance detectors for light detection
Colantoni I;Castellano MG;
2015
Abstract
The development of sensitive cryogenic light detectors is of primary interest for bolometric experiments searching for rare events like dark matter interactions or neutrino-less double beta decay. Thanks to their good energy resolution and the natural multiplexed read-out, Kinetic Inductance Detectors (KIDs) are particularly suitable for this purpose. To efficiently couple KIDs-based light detectors to the large crystals used by the most advanced bolometric detectors, active surfaces of several cm2 are needed. For this reason, we are developing phonon-mediated detectors. In this paper, we present the results obtained with a prototype consisting of four 40 nm thick aluminum resonators patterned on a 2 × 2 cm2 silicon chip, and calibrated with optical pulses and X-rays. The detector features a noise resolution ?I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
