We investigate the ground deformation pattern and the source geometry responsible of the 2016 Central Italy seismic sequence (CISS) by joint exploiting the Multisensors and Multiorbits satellite measurements (i.e. Sentinel-1 and ALOS 2) and the integration with the available geological/structural and seismological data. To this purpose we integrate these measurements in a physically-based optimization model scenario. We consider the new seismic sequence that struck Umbria-Marche Apennines (Central Italy) since the month of August 2016. This seismic sequence started with the Amatrice earthquake (MW 6.0) occurred on August 24th. This event nucleated along a SW dipping extensional lineament, called the Mt. Gorzano fault (e.g. Boncio et al., 2004), and caused 299 casualties and severe damages to buildings and historical monuments, devastating Amatrice itself, Accumoli and other surrounding small towns. During the following months, very numerous aftershocks have nucleated and the CISS has migrated northward (e.g. Tinti et al., 2016). On October 26th two intense events occurred with ML 5.4 and ML 5.9, respectively. Moreover, on October 30th the strongest event of the sequence occurred with MW 6.5 close to the small town of Norcia and nucleated along the Mt. Vettore extensional fault (e.g. Galadini & Galli, 2003). The involved area is still active and a lot of earthquake nucleate every day: up to now, the INGV seismic network has recorded more than 30000 events. Despite to the tectonic complexity of the 2016 CISS, we achieved a good determination/description of the ground deformation pattern thanks to the big amount of SAR data acquired by Sentinel-1 (ESA) and ALOS 2 (JAXA) satellites, characterized by small temporal baselines and from different orbits (ascending and descending orbits). In this way, we can analyse in greater detail the ground deformation pattern of the individual seismic events, also decomposing the vertical component and the east-west one. In this context SAR data are a fundamental tool to better understand the spatio-temporal evolution of 2016 CISS. In this context, the present study, benefiting from satellite and in situ information, will investigate, through a numerical optimization multiphysics approach, the most suitable geological scenario that governed the spatial and temporal evolution of the Amatrice-Norcia seismic sequence. References Boncio, P., Lavecchia, G., Milana, G., & Rozzi, B. (2004). "Seismogenesis in Central Apennines, Italy: an integrated analysis of minor earthquake sequences and structural data in the Amatrice-Campotosto area." Annals of Geophysics, vol. 47, issue 6, December 2004. Galadini, F., & Galli, P. (2003). "Paleoseismology of silent faults in the Central Apennines (Italy): the Mt. Vettore and Laga Mts. faults." Annals of Geophysics, vol. 46, issue 5, October 2003. Tinti, E., Scognamiglio, L., Michelini, A., & Cocco, M. (2016). "Slip heterogeneity and directivity of the ML 6.0, 2016, Amatrice earthquake estimated with rapid finite-fault inversion." Geophysical Research Letters, vol. 43, issue 20.
On the 2016 Central Italy seismic sequence governing scenario investigated via DInSAR and geological data integration
Bonano M;Castaldo R;Casu F;De Luca C;De Novellis V;Lanari R;Manunta M;Manzo M;Pepe S;Solaro G;Tizzani P;Zinno I
2017
Abstract
We investigate the ground deformation pattern and the source geometry responsible of the 2016 Central Italy seismic sequence (CISS) by joint exploiting the Multisensors and Multiorbits satellite measurements (i.e. Sentinel-1 and ALOS 2) and the integration with the available geological/structural and seismological data. To this purpose we integrate these measurements in a physically-based optimization model scenario. We consider the new seismic sequence that struck Umbria-Marche Apennines (Central Italy) since the month of August 2016. This seismic sequence started with the Amatrice earthquake (MW 6.0) occurred on August 24th. This event nucleated along a SW dipping extensional lineament, called the Mt. Gorzano fault (e.g. Boncio et al., 2004), and caused 299 casualties and severe damages to buildings and historical monuments, devastating Amatrice itself, Accumoli and other surrounding small towns. During the following months, very numerous aftershocks have nucleated and the CISS has migrated northward (e.g. Tinti et al., 2016). On October 26th two intense events occurred with ML 5.4 and ML 5.9, respectively. Moreover, on October 30th the strongest event of the sequence occurred with MW 6.5 close to the small town of Norcia and nucleated along the Mt. Vettore extensional fault (e.g. Galadini & Galli, 2003). The involved area is still active and a lot of earthquake nucleate every day: up to now, the INGV seismic network has recorded more than 30000 events. Despite to the tectonic complexity of the 2016 CISS, we achieved a good determination/description of the ground deformation pattern thanks to the big amount of SAR data acquired by Sentinel-1 (ESA) and ALOS 2 (JAXA) satellites, characterized by small temporal baselines and from different orbits (ascending and descending orbits). In this way, we can analyse in greater detail the ground deformation pattern of the individual seismic events, also decomposing the vertical component and the east-west one. In this context SAR data are a fundamental tool to better understand the spatio-temporal evolution of 2016 CISS. In this context, the present study, benefiting from satellite and in situ information, will investigate, through a numerical optimization multiphysics approach, the most suitable geological scenario that governed the spatial and temporal evolution of the Amatrice-Norcia seismic sequence. References Boncio, P., Lavecchia, G., Milana, G., & Rozzi, B. (2004). "Seismogenesis in Central Apennines, Italy: an integrated analysis of minor earthquake sequences and structural data in the Amatrice-Campotosto area." Annals of Geophysics, vol. 47, issue 6, December 2004. Galadini, F., & Galli, P. (2003). "Paleoseismology of silent faults in the Central Apennines (Italy): the Mt. Vettore and Laga Mts. faults." Annals of Geophysics, vol. 46, issue 5, October 2003. Tinti, E., Scognamiglio, L., Michelini, A., & Cocco, M. (2016). "Slip heterogeneity and directivity of the ML 6.0, 2016, Amatrice earthquake estimated with rapid finite-fault inversion." Geophysical Research Letters, vol. 43, issue 20.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
