Electrochemotherapy (ECT) is a clinical procedure for the local treatment of solid tumors, which combines the application of pulsed electric fields (PEFs) and chemotherapeutic drugs, by exploiting the PEF-induced membrane permeabilization (electroporation, EP). The ESOPE pulsing protocol (8 pulses with 100 ?s duration and 1 kV/cm electric field strength, given at 1 Hz or 5 kHz as repetition rate) is the only protocol approved for application on human patients and is currently used in the clinical practice. Moving from an experimental study comparing the efficacy of ESOPE to that of modified PEF protocol with lower electric field intensity and higher pulse number, in this paper an electrophysiological model is used to provide theoretical support to the experimental results. The pore density and the transmembrane voltage time behavior at the upper pole of a single spherical cell are considered, in order to assess the EP effect of the applied pulse train, considered as boundary condition in the field based solution of the problem. The simulation results highlight that, 40 pulses 750 V/cm is a good candidate as ESOPE equivalent protocol.
FEM-based numerical simulation supporting experimentally tested Electrochemotherapy protocols
Romeo S;Sannino A;Zeni O;
2017
Abstract
Electrochemotherapy (ECT) is a clinical procedure for the local treatment of solid tumors, which combines the application of pulsed electric fields (PEFs) and chemotherapeutic drugs, by exploiting the PEF-induced membrane permeabilization (electroporation, EP). The ESOPE pulsing protocol (8 pulses with 100 ?s duration and 1 kV/cm electric field strength, given at 1 Hz or 5 kHz as repetition rate) is the only protocol approved for application on human patients and is currently used in the clinical practice. Moving from an experimental study comparing the efficacy of ESOPE to that of modified PEF protocol with lower electric field intensity and higher pulse number, in this paper an electrophysiological model is used to provide theoretical support to the experimental results. The pore density and the transmembrane voltage time behavior at the upper pole of a single spherical cell are considered, in order to assess the EP effect of the applied pulse train, considered as boundary condition in the field based solution of the problem. The simulation results highlight that, 40 pulses 750 V/cm is a good candidate as ESOPE equivalent protocol.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.