Transition-state theory (TST) as implemented by Gusev and Suter was applied to calculate the zero-loading-diffusion coefficients of 12 gases (He, Ne, Ar, Xe, H2, N2, O2, CO2, SF6, CH4, CF4, and i-C4H10) in two different zeolites, silicalite-1 and silica-sodalite. Gusev-Suter (GS) model was and is widely and successfully used for polymeric matrixes. Therefore, the reliability of this method was studied for gas diffusion in silicalite-1 and silica-sodalite using CVFF aug and CVFF force fields and two simulation cells. The results were compared with diffusion coefficients used to reproduce the permeance in a silicalite-1 membrane. Model limits were also tested comparing the H2, He and Ne diffusion in silica-sodalite with previous calculations of classical and quantum TST. Gusev-Suter method systematically underestimates the average diffusion coefficients of the considered gases; underestimation was less marked for species larger than methane. The ratio between Dx and Dy components in silicalite-1 was found near one differently from the expected result. The diffusion coefficients obtained using Gusev-Suter approach in silicalite-1 and silica-sodalite can be improved with an appropriate average displacements definition, set in this work equal to 0. Concerning the anisotropy diffusion in silicalite-1, this work shows that correlated jumps in a Gusev-Suter procedure would also be considered. Gusev-Suter computational time for diffusivity estimation of Xe, CF4, CO2 and SF6 is much shorter than the corresponding molecular dynamics (MD) simulation time.
Gusev and Suter calculation of the diffusion coefficients of light gases in Silicalite-1 membrane and silica sodalite zeolite
De Luca G;Barbieri G;Bernardo P;Drioli E
2004
Abstract
Transition-state theory (TST) as implemented by Gusev and Suter was applied to calculate the zero-loading-diffusion coefficients of 12 gases (He, Ne, Ar, Xe, H2, N2, O2, CO2, SF6, CH4, CF4, and i-C4H10) in two different zeolites, silicalite-1 and silica-sodalite. Gusev-Suter (GS) model was and is widely and successfully used for polymeric matrixes. Therefore, the reliability of this method was studied for gas diffusion in silicalite-1 and silica-sodalite using CVFF aug and CVFF force fields and two simulation cells. The results were compared with diffusion coefficients used to reproduce the permeance in a silicalite-1 membrane. Model limits were also tested comparing the H2, He and Ne diffusion in silica-sodalite with previous calculations of classical and quantum TST. Gusev-Suter method systematically underestimates the average diffusion coefficients of the considered gases; underestimation was less marked for species larger than methane. The ratio between Dx and Dy components in silicalite-1 was found near one differently from the expected result. The diffusion coefficients obtained using Gusev-Suter approach in silicalite-1 and silica-sodalite can be improved with an appropriate average displacements definition, set in this work equal to 0. Concerning the anisotropy diffusion in silicalite-1, this work shows that correlated jumps in a Gusev-Suter procedure would also be considered. Gusev-Suter computational time for diffusivity estimation of Xe, CF4, CO2 and SF6 is much shorter than the corresponding molecular dynamics (MD) simulation time.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.