Nowadays, considerable efforts have been devoted to design and control the fabrication of multifunctional materials in order to fulfil the needs of modern technology for novel sensors, microwave devices, energy harvesting, photovoltaic technologies, solid-state refrigeration, data storage recording technologies and multiferroic random access multi-state memories (MFRAM) [1]. Particulate ceramic composites are low cost, simple production technology, higher strain mediated magneto-electric coupling (since electric order phase/magnetic phase interface density can be higher) and easy control of electrical and magnetic properties if the ferroelectric phase and the ferromagnetic one are mixed in a favourable proportion under the percolation threshold of the ferromagnetic phase. A great research effort is in progress to improve the fabrication of PZT-CoFe2O4 (PZT-CF) composites due to the excellent piezoelectric properties showed by the PZT material class and the large magnetostrictive coefficient of the CF. Unfortunately, during the sintering process particulate PZT-CF composites, side reactions do occur that are detrimental to the properties of the so-obtained material. In this study, we have avoided such reactions and PbO loss by setting a quite-fast sintering process [2]. The extent of PbO loss was determined by means of XRD analysis of the densified samples taking into account the amount of ZrO2 and the variations of the perovskite's tetragonality [2]. The calculated PbO loss values are in agreement with the final density and the microstructure of PZT-CF composites. In particular, microstructural characterization showed that CF grain size distribution can be mono- or bi-modal, and CF overgrowth was found to affect the coercivity of the material [3]. [1] M. M. Vopson, Fundamentals of Multiferroic Materials and Their Possible Applications. Crit. Rev. Solid State 4:40 (2015) 223-250 doi:10.1080/10408436.2014.992584 [2] P. Galizia, et al., PZT-cobalt ferrite particulate composites: Densification and lead loss controlled by quite-fast sintering. J. Eur. Ceram. Soc. (2016). doi:10.1016/j.jeurceramsoc.2016.08.025 [3] P. Galizia, C. Baldisserri, C. Capiani, C. Galassi, Multiple parallel twinning overgrowth in nanostructured dense cobalt ferrite. Mater. Design 109 (2016) 19-26. doi:10.1016/j.matdes.2016.07.050
Reduction of PbO loss in PZT-cobalt ferrite composites through quite-fast sintering and its quantification by means of XRD analysis
Galizia P;Capiani C;Galassi C
2017
Abstract
Nowadays, considerable efforts have been devoted to design and control the fabrication of multifunctional materials in order to fulfil the needs of modern technology for novel sensors, microwave devices, energy harvesting, photovoltaic technologies, solid-state refrigeration, data storage recording technologies and multiferroic random access multi-state memories (MFRAM) [1]. Particulate ceramic composites are low cost, simple production technology, higher strain mediated magneto-electric coupling (since electric order phase/magnetic phase interface density can be higher) and easy control of electrical and magnetic properties if the ferroelectric phase and the ferromagnetic one are mixed in a favourable proportion under the percolation threshold of the ferromagnetic phase. A great research effort is in progress to improve the fabrication of PZT-CoFe2O4 (PZT-CF) composites due to the excellent piezoelectric properties showed by the PZT material class and the large magnetostrictive coefficient of the CF. Unfortunately, during the sintering process particulate PZT-CF composites, side reactions do occur that are detrimental to the properties of the so-obtained material. In this study, we have avoided such reactions and PbO loss by setting a quite-fast sintering process [2]. The extent of PbO loss was determined by means of XRD analysis of the densified samples taking into account the amount of ZrO2 and the variations of the perovskite's tetragonality [2]. The calculated PbO loss values are in agreement with the final density and the microstructure of PZT-CF composites. In particular, microstructural characterization showed that CF grain size distribution can be mono- or bi-modal, and CF overgrowth was found to affect the coercivity of the material [3]. [1] M. M. Vopson, Fundamentals of Multiferroic Materials and Their Possible Applications. Crit. Rev. Solid State 4:40 (2015) 223-250 doi:10.1080/10408436.2014.992584 [2] P. Galizia, et al., PZT-cobalt ferrite particulate composites: Densification and lead loss controlled by quite-fast sintering. J. Eur. Ceram. Soc. (2016). doi:10.1016/j.jeurceramsoc.2016.08.025 [3] P. Galizia, C. Baldisserri, C. Capiani, C. Galassi, Multiple parallel twinning overgrowth in nanostructured dense cobalt ferrite. Mater. Design 109 (2016) 19-26. doi:10.1016/j.matdes.2016.07.050I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
