Integration of space-borne DInSAR data in a multi-method monitoring concept for alpine mass movements

This study presents the results of an experimental application of a multi-method measurement concept for the monitoring of alpine mass movements. Satellite-borne differential interferometric synthetic aperture radar (DInSAR) was applied as the key technology. To improve the information contents of the DInSAR displacement data for an individual mass movement, a complementary measurement was carried out with a three dimensional measurement system. The information on the 3D movement characteristics obtained by this complementary measurement was used to extrapolate subsequent DInSAR measurements to 3D. Terrestrial laser scanning (TLS) and Global Navigation Satellite System (GNSS) data were tested as complementary 3D measurement systems. The deviations between the single measurement systems were mainly controlled by the error budgets of the different methods. An exception were short term GNSS single point time series which included small scale surface movements that were not captured by the other methods. TLS proved to be the most suitable complementary method. A single TIS repeat measurement was sufficient to create a mask, which enables the projection of DInSAR displacement data to 3D. The application of satellite-borne DInSAR in alpine terrain is challenging; signal decorrelation is a problem due to fast terrain movements and snow coverage and can cause failure of the measurement system. (C) 2016 Elsevier B.V. All rights reserved.