Boride coating on titanium alloys as biomaterial in wear and fretting applications

The issue taken into account is the lifespan and potential toxicity of arthroprostheses with a focus on metal-polyethylene coupling. The gold standard for hip prostheses is a femoral component made of Ti6Al4V alloy, a head made of Co-Cr-Mo alloy and an insert made of UHMWPE while for knee prostheses the gold standard is a tibial component made of Co-Cr-Mo alloy, a femoral component made of Ti6Al4V and an insert made of UHMWPE. Open issues are wear of UHMWPE, toxicity of Co alloys and low fretting/wear resistance of Ti alloys. The aim of this research is to focus on the most biocompatible material (Ti6Al4V alloy) in order to improve its bio-tribological characteristics. A ceramic surface conversion by thermal treatment was used to obtain a borided coating on the titanium alloy surface in order to combine high hardness, good wettability and lubricant behavior of ceramics with good mechanical properties of Ti metal alloys. The coatings were characterized by means of optical microscope observation, FESEM analysis, XRD analysis, microindentation, scratch, friction and wear tests in order to identify the thermal treatment most suitable to obtain a coating with the required properties (thickness, hardness, roughness, wear resistance, friction coefficient and scratch resistance, surface lubrication ability in contact with human fluids) without significant modification of the microstructure of the substrate.