Mixed proton and electron conductor ceramic composites are among the most promising materials for hydrogen separation membrane technology especially if designed in an asymmetrical configuration (thin membrane supported onto a thicker porous substrate). However a precise processing optimization is needed to effectively obtain planar and crack free asymmetrical membranes with suitable microstructure and composition without affecting their hydrogen separation efficiency. This work highlights for the first time the most critical issues linked to the tape casting process used to obtain BaCe0.65Zr0.20Y0.15O3-? - Ce0.8Gd0.2O2-? (BCZY-GDC) asymmetrical membranes for H2 separation. The critical role of the co-firing process, sintering aid and atmosphere was critically investigated. The optimization of the production strategy allowed to obtain asymmetric membranes constituted by a dense 20 ?m-thick ceramic-ceramic composite layer supported by a porous (36%) 750 ?m-thick BCZY-GDC substrate. The asymmetric membranes here reported showed H2 fluxes (0.47 mL min-1 cm-2 at 750 °C) among the highest obtained for an all-ceramic membrane.
Production strategies of asymmetric BaCe0.65Zr0.20Y0.15O3-? - Ce0.8Gd0.2O2-? membrane for hydrogen separation
D Montaleone;P Pinasco;A Sanson
2020
Abstract
Mixed proton and electron conductor ceramic composites are among the most promising materials for hydrogen separation membrane technology especially if designed in an asymmetrical configuration (thin membrane supported onto a thicker porous substrate). However a precise processing optimization is needed to effectively obtain planar and crack free asymmetrical membranes with suitable microstructure and composition without affecting their hydrogen separation efficiency. This work highlights for the first time the most critical issues linked to the tape casting process used to obtain BaCe0.65Zr0.20Y0.15O3-? - Ce0.8Gd0.2O2-? (BCZY-GDC) asymmetrical membranes for H2 separation. The critical role of the co-firing process, sintering aid and atmosphere was critically investigated. The optimization of the production strategy allowed to obtain asymmetric membranes constituted by a dense 20 ?m-thick ceramic-ceramic composite layer supported by a porous (36%) 750 ?m-thick BCZY-GDC substrate. The asymmetric membranes here reported showed H2 fluxes (0.47 mL min-1 cm-2 at 750 °C) among the highest obtained for an all-ceramic membrane.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
