Analysis of the techniques for assessing the features of blast-induced fragmentation in an open pit quarry

The paper deals with the study of empirical models for the analysis of blasts-induced fragmentation. To verify the reliability of the method, the results obtained a priori through the application of the models are compared with the analyses of muck piles photos taken from a series of blasts in an open pit quarry, thanks to the Split-desktop software (Split Engineering, LLC, Tucson, USA). The study of the particle size distribution is very important when sizing an excavation site, as the average size of the pile must be compatible with the equipment used for clearing and conveyance, and with the first phase of the processing plant, i.e. primary crushing. After a description of the excavation technique in use at the quarry site, its main characteristics are outlined. The parameters used to create the empirical models refer to the geomechanical characteristics of the rock, the geometry of the blasts, the characteristics of the explosive and its interaction with the rock mass, paying attention to the correlation between initiation timing and induced fragmentation. A detailed description of some empirical models together with the Split-desktop software were therefore provided. Thanks to both data and photos of the muck-piles from the exploitation at the quarry, the particle size curves resulting from each model were compared with those obtained from the software. This allowed to validate the empirical method in a preliminary design phase.