A lithography-based additive manufacturing technique was used for the first time to produce laser-emitting transparent 10 at.% Yb-doped yttrium aluminum garnet (Yb:YAG) ceramics from a mixture of oxide powders as starting materials. The ceramics were densified by vacuum sintering. Output power of more than 2.16 W and a slope efficiency of 17.6% were achieved under quasi-continuous-wave laser pumping.
Transparent laser ceramics by stereolithography
Hostasa J
Primo
;Toci G;Esposito L;Piancastelli A;Pirri A;Patrizi B;Vannini M;Biasini VUltimo
2020
Abstract
A lithography-based additive manufacturing technique was used for the first time to produce laser-emitting transparent 10 at.% Yb-doped yttrium aluminum garnet (Yb:YAG) ceramics from a mixture of oxide powders as starting materials. The ceramics were densified by vacuum sintering. Output power of more than 2.16 W and a slope efficiency of 17.6% were achieved under quasi-continuous-wave laser pumping.File in questo prodotto:
| File | Dimensione | Formato | |
|---|---|---|---|
|
prod_425642-doc_177418.pdf
solo utenti autorizzati
Descrizione: Transparent laser ceramics by stereolithography
Tipologia:
Versione Editoriale (PDF)
Licenza:
NON PUBBLICO - Accesso privato/ristretto
Dimensione
719.14 kB
Formato
Adobe PDF
|
719.14 kB | Adobe PDF | Visualizza/Apri Richiedi una copia |
|
post-print ScriptaMat.pdf
Open Access dal 18/06/2022
Descrizione: post-print
Tipologia:
Documento in Post-print
Licenza:
Creative commons
Dimensione
670.57 kB
Formato
Adobe PDF
|
670.57 kB | Adobe PDF | Visualizza/Apri |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
