European short-rotation poplar plantations are harvested at 5-8 year rotations and produce relatively small stems (0.05-0.10m), which represent a major challenge when designing a cost-effective harvesting chain. Until now, the challenge has been met through whole-tree chipping, which allows mass-handling all through the harvesting chain. However, the production of higher value logs for the panel industry requires devising different solutions. This study presents a fully mechanized low-investment system using an excavator-based feller-buncher shear, a grapple skidder obtained from the conversion of a common farm tractor and an excavator-mounted grapple saw adapted to work as a makeshift slasher. The system was tested in Northwestern Italy, achieving high productivity (between 14 and 20 t fresh weight per scheduled machine hour) and low harvesting cost (between 9 and 14 EUR t fresh weight). However, crosscutting quality needs further improvement, because almost 50% of the logs did not meet factory specifications. Solutions to solve this issue are proposed. The tested system is suitable for local small-scale operators because it can be acquired with a reasonable capital investment (400,000 EUR) and it is versatile enough for use in a number of alternative jobs, when the coppice harvesting season is over.
Low-investment fully mechanized harvesting of short-rotation poplar (populus spp.) plantations
Spinelli R;Magagnotti N;Lombardini C
2020
Abstract
European short-rotation poplar plantations are harvested at 5-8 year rotations and produce relatively small stems (0.05-0.10m), which represent a major challenge when designing a cost-effective harvesting chain. Until now, the challenge has been met through whole-tree chipping, which allows mass-handling all through the harvesting chain. However, the production of higher value logs for the panel industry requires devising different solutions. This study presents a fully mechanized low-investment system using an excavator-based feller-buncher shear, a grapple skidder obtained from the conversion of a common farm tractor and an excavator-mounted grapple saw adapted to work as a makeshift slasher. The system was tested in Northwestern Italy, achieving high productivity (between 14 and 20 t fresh weight per scheduled machine hour) and low harvesting cost (between 9 and 14 EUR t fresh weight). However, crosscutting quality needs further improvement, because almost 50% of the logs did not meet factory specifications. Solutions to solve this issue are proposed. The tested system is suitable for local small-scale operators because it can be acquired with a reasonable capital investment (400,000 EUR) and it is versatile enough for use in a number of alternative jobs, when the coppice harvesting season is over.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.