Attenzione: i dati modificati non sono ancora stati salvati. Per confermare inserimenti o cancellazioni di voci è necessario confermare con il tasto SALVA/INSERISCI in fondo alla pagina
CNR Institutional Research Information System
The Neutral Beam Test Facility (NBTF), Padua, Italy, is a facility devoted to the test and optimization of the Neutral Beam (NB) Injector for ITER. A full-scale prototype, called MITICA, is under construction at NBTF and has to demonstrate all the design parameters for ITER, among which a stable beam operation at the energy of 1 MeV. To test and optimize the stable high voltage holding of 1 MV, a dedicated campaign is foreseen for 2022–2023, utilizing realistic mockups of MITICA ion source and accelerator. During the campaign, the mockup of the ion source will be biased with an increasing potential up to <inline-formula> <tex-math notation="LaTeX">$-$</tex-math> </inline-formula>1 MV and the discharge toward the grounded electrodes will be observed. In this way, possible weak points of the geometry will be detected and possibly mitigated. As diagnostics for arc discharge position and intensity, a system of cameras was designed, including visible cameras, high-speed camera, and IR camera, placed on the available viewports of beam source vessel, and pointed toward the areas with higher probability of electric discharge. The results of this optical diagnostics will be then compared with the electric measurements of the discharges taken on a dedicated ground electrode, for a cross check. This article describes the motivations of the choice of the type and number of diagnostic cameras adopted during the experiments, the optimization of their layout, which includes also the use of mirrors, and the design of mechanical supports.
Optical Diagnostics for High-Voltage Tests in MITICA
Aprile D;Chitarin G;Lotto L;Fincato M;Patton T;Pilan N;Valente M
2022
Abstract
The Neutral Beam Test Facility (NBTF), Padua, Italy, is a facility devoted to the test and optimization of the Neutral Beam (NB) Injector for ITER. A full-scale prototype, called MITICA, is under construction at NBTF and has to demonstrate all the design parameters for ITER, among which a stable beam operation at the energy of 1 MeV. To test and optimize the stable high voltage holding of 1 MV, a dedicated campaign is foreseen for 2022–2023, utilizing realistic mockups of MITICA ion source and accelerator. During the campaign, the mockup of the ion source will be biased with an increasing potential up to $-$1 MV and the discharge toward the grounded electrodes will be observed. In this way, possible weak points of the geometry will be detected and possibly mitigated. As diagnostics for arc discharge position and intensity, a system of cameras was designed, including visible cameras, high-speed camera, and IR camera, placed on the available viewports of beam source vessel, and pointed toward the areas with higher probability of electric discharge. The results of this optical diagnostics will be then compared with the electric measurements of the discharges taken on a dedicated ground electrode, for a cross check. This article describes the motivations of the choice of the type and number of diagnostic cameras adopted during the experiments, the optimization of their layout, which includes also the use of mirrors, and the design of mechanical supports.
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.14243/412865
Citazioni
ND
2
ND
social impact
Conferma cancellazione
Sei sicuro che questo prodotto debba essere cancellato?
simulazione ASN
Il report seguente simula gli indicatori relativi alla propria produzione scientifica in relazione alle soglie ASN 2023-2025 del proprio SC/SSD. Si ricorda che il superamento dei valori soglia (almeno 2 su 3) è requisito necessario ma non sufficiente al conseguimento dell'abilitazione. La simulazione si basa sui dati IRIS e sugli indicatori bibliometrici alla data indicata e non tiene conto di eventuali periodi di congedo obbligatorio, che in sede di domanda ASN danno diritto a incrementi percentuali dei valori. La simulazione può differire dall'esito di un’eventuale domanda ASN sia per errori di catalogazione e/o dati mancanti in IRIS, sia per la variabilità dei dati bibliometrici nel tempo. Si consideri che Anvur calcola i valori degli indicatori all'ultima data utile per la presentazione delle domande.
La presente simulazione è stata realizzata sulla base delle specifiche raccolte sul tavolo ER del Focus Group IRIS coordinato dall'Università di Modena e Reggio Emilia e delle regole riportate nel DM 589/2018 e allegata Tabella A. Cineca, l'Università di Modena e Reggio Emilia e il Focus Group IRIS non si assumono alcuna responsabilità in merito all’uso che il diretto interessato o terzi faranno della simulazione. Si specifica inoltre che la simulazione contiene calcoli effettuati con dati e algoritmi di pubblico dominio e deve quindi essere considerata come un mero ausilio al calcolo svolgibile manualmente o con strumenti equivalenti.