Effect of H2O Activity on Zeolite Formation

In an effort to understand the effects of H2O activity on zeolite formation, we have synthesized LTA zeolite using a combination of freezing processes and varying drying temperatures. Sodium aluminate and sodium silicate were used to form LTA zeolite, according to the IZA (International Zeolite Association) protocol. The synthesis steps were modified by adding the precursor frozen process by a rapid liquid nitrogen (-196 degrees C) treatment or slow conventional freezer treatment (-20 degrees C). The samples were subsequently sonicated and then dried at 80 degrees C or 40 degrees C. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were performed on the samples immediately after the drying process as well as after 2 weeks and 1 month of aging the solid products. The results indicated that LTA zeolite does not form. The silica-alumina precursor after both freezing processes and after being dried at 80 degrees C showed the presence of sodalite displaying stable behavior over time. Both sets of samples dried at 40 degrees C and did not show the presence of zeolite immediately after the drying process. However, after 2 weeks, the liquid nitrogen-frozen precursor was characterized by the presence of EMT whereas zeolites never formed in the -20 degrees C samples. These results suggest that freezing processes differently control the H2O activity during the drying and aging processes in the solid state. Thus, although the precursor chemical composition is the same, the type of zeolite formed is different.