Germanium recently attracted a renewed interest for its potential applications in several fields such as nanoelectronics, photonics, plasmonics, etc., but well-known issues about doping at high concentration and controlling impurity profiles prevent its integration in technology. To this purpose, p-type doping aluminum ion implantation followed by pulsed laser annealing in the melting regime has been investigated for the first time. In particular, two different regimes have been studied, in order to explore the limit of incorporation for such a method: 6.4 x 10(14) Al/cm(2) and 4.2 x 10(15) Al/cm(2), both at 25 keV, corresponding to concentrations below and above the solid solubility, respectively. We found that in the former case, oxygen contamination precludes full activation (< 60%), as suggested by Raman characterizations. Besides, secondary ion mass spectrometry evidences pronounced out-diffusion and pile-up of the dopant near the surface. In the letter case, remarkable (similar to 1 x 10(20) Al/cm(3)), although partial (similar to 30%), electrical activation is obtained, independently on O occurrence. Therefore, O-Al and Al-Al clustering are proposed as concurrent mechanisms, limiting full activation at high implanted dose. Nevertheless, the samples display good crystalline quality and, surprisingly, a significant thermal stability (up to 600 degrees C).
p-type doping of Ge by Al ion implantation and pulsed laser melting
Impellizzeri G;Napolitani E
2020
Abstract
Germanium recently attracted a renewed interest for its potential applications in several fields such as nanoelectronics, photonics, plasmonics, etc., but well-known issues about doping at high concentration and controlling impurity profiles prevent its integration in technology. To this purpose, p-type doping aluminum ion implantation followed by pulsed laser annealing in the melting regime has been investigated for the first time. In particular, two different regimes have been studied, in order to explore the limit of incorporation for such a method: 6.4 x 10(14) Al/cm(2) and 4.2 x 10(15) Al/cm(2), both at 25 keV, corresponding to concentrations below and above the solid solubility, respectively. We found that in the former case, oxygen contamination precludes full activation (< 60%), as suggested by Raman characterizations. Besides, secondary ion mass spectrometry evidences pronounced out-diffusion and pile-up of the dopant near the surface. In the letter case, remarkable (similar to 1 x 10(20) Al/cm(3)), although partial (similar to 30%), electrical activation is obtained, independently on O occurrence. Therefore, O-Al and Al-Al clustering are proposed as concurrent mechanisms, limiting full activation at high implanted dose. Nevertheless, the samples display good crystalline quality and, surprisingly, a significant thermal stability (up to 600 degrees C).I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.