Solar energy exploitation is one of the most challenging applications for sustainable energy production. In this work a photoactivated fuel cell was developed, using visible light and the Fe(III)/Fe(II) redox couple for the simultaneous production of electrical energy and oxidation of polluting organics (alcohols) contained in synthetic and real wastewaters. WO was selected as a cheap and environmentally friendly photocatalyst more efficient than TiO (i) under visible light irradiation and (ii) in the presence of in-situ photodeposited Pd. Pd photodeposition was found to reduce the band gap of bare WO, thus increasing visible light capture and limiting the occurrence of photogenerated hole/electron recombination. Higher photocatalytic performances were recorded over WO-Pd compared to TiO and bare WO, despite the low BET superficial area of WO-Pd (2.34 m g). Optimal conditions were identified at pH = 2.0 with 2% w/w Pd load. The results also evidenced the influence of the selected sacrificial organics and water matrices. A quantum yield of 84.89% and an energy efficiency of 4.15% were the best results achieved so far for the proposed system. The present photoelectrochemical cell offers a very promising system for electrical energy production by using wastewater from wine manufacturing industry and solar light radiation.

Photoactivated Fe(III)/Fe(II)/WO3-Pd fuel cell for electricity generation using synthetic and real effluents under visible light

Di Somma I;
2020

Abstract

Solar energy exploitation is one of the most challenging applications for sustainable energy production. In this work a photoactivated fuel cell was developed, using visible light and the Fe(III)/Fe(II) redox couple for the simultaneous production of electrical energy and oxidation of polluting organics (alcohols) contained in synthetic and real wastewaters. WO was selected as a cheap and environmentally friendly photocatalyst more efficient than TiO (i) under visible light irradiation and (ii) in the presence of in-situ photodeposited Pd. Pd photodeposition was found to reduce the band gap of bare WO, thus increasing visible light capture and limiting the occurrence of photogenerated hole/electron recombination. Higher photocatalytic performances were recorded over WO-Pd compared to TiO and bare WO, despite the low BET superficial area of WO-Pd (2.34 m g). Optimal conditions were identified at pH = 2.0 with 2% w/w Pd load. The results also evidenced the influence of the selected sacrificial organics and water matrices. A quantum yield of 84.89% and an energy efficiency of 4.15% were the best results achieved so far for the proposed system. The present photoelectrochemical cell offers a very promising system for electrical energy production by using wastewater from wine manufacturing industry and solar light radiation.
2020
Istituto di Scienze e Tecnologie per l'Energia e la Mobilità Sostenibili - STEMS
Solar energy
WO3
Photoelectrochemical fuel cell
Photocatalyst
Energy efficiency
Winery wastewater
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.14243/430108
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 16
  • ???jsp.display-item.citation.isi??? ND
social impact