Pd, Rh, Pt are employed in a wide range of applications, such as catalytic converters, fuel cells and electronic devices. In the last years, an increasing pressure on their market was recorded due to a growing demand and limited resources. Therefore, the recovery of these materials from wastes represents an interesting goal to be achieved. The most widely proposed techniques for recovering the palladium from wastes are leaching and ion exchange. Strong oxidizers, acids and high temperature (343-363 K) are used for leaching, leading problems for the environment and the safety. In this work the attention was focused on a system containing zero-valent palladium nanoparticles in which the leaching is performed in mild acidic conditions, by using chloride solutions containing cupric ions (NaCl/CuCl). The process was studied at varying temperature, pH, chloride and cupric ion concentrations. Good results were obtained at pH 5.0 and temperatures between 288 K and 333 K. The process is more acceptable than the traditional ones from a safety point of view being characterized by less severe conditions (pH and temperatures). A shrinking spherical particles model was adopted to analyse the experimental data from which a development under a kinetic control was demonstrated.
Zero-valent palladium dissolution using NaCl/CuCl2 solutions
Di Somma I
2021
Abstract
Pd, Rh, Pt are employed in a wide range of applications, such as catalytic converters, fuel cells and electronic devices. In the last years, an increasing pressure on their market was recorded due to a growing demand and limited resources. Therefore, the recovery of these materials from wastes represents an interesting goal to be achieved. The most widely proposed techniques for recovering the palladium from wastes are leaching and ion exchange. Strong oxidizers, acids and high temperature (343-363 K) are used for leaching, leading problems for the environment and the safety. In this work the attention was focused on a system containing zero-valent palladium nanoparticles in which the leaching is performed in mild acidic conditions, by using chloride solutions containing cupric ions (NaCl/CuCl). The process was studied at varying temperature, pH, chloride and cupric ion concentrations. Good results were obtained at pH 5.0 and temperatures between 288 K and 333 K. The process is more acceptable than the traditional ones from a safety point of view being characterized by less severe conditions (pH and temperatures). A shrinking spherical particles model was adopted to analyse the experimental data from which a development under a kinetic control was demonstrated.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.