Global JINTRAC Simulations for ITER PFPO Scenario Development

The inductive goal of ITER is to produce 500s long burning plasmas with Q = Pfus/Paux >=10[1]. This requires the development of operationally robust scenarios that span the whole plasma discharge from startup to termination not only in Deuterium Tritium (DT) but also in the Pre Fusion-Plasma Operation (PFPO) phase in Hydrogen (H) and Helium (He). In the PFPO phase, subsystems, such as the ELM mitigation system, will be commissioned and important lessons will be learnt about how to optimise and operate ITER plasmas within machine protection limits. As ITER's plasma facing surfaces (PFCs) are made of Beryllium (Be) and Tungsten (W), ITER operation will require applying the ITER heating and fuelling and impurity seeding systems in an optimum way to achieve the best plasma performance while ensuring low power fluxes and low erosion of the PFCs. In particular, the optimisation will include: i) minimising the release of tungsten by plasma-wall interactions; ii) controlling tungsten transport into the core plasma to avoid accumulation; iii) acceptable divertor power loads (<10MWm-2); iv) tolerable Neutral Beam (NB) shine-though loads; and in the Fusion-Plasma Operation (PFO) phase also v) the control of the DT mix in the core plasma. JINTRAC[2], developed by EUROfusion, is in a prime position to tackle this scenario development challenge with its suite of core (JETTO/SANCO/EDWM) and SOL/divertor (EDGE2D/EIRENE) transport codes that concurrently can simulate all these aspects.