The two-color laser-induced incandescence (2C-LII) technique can be used for soot volume fraction measurements with no use of a reference flame of known soot concentration. In this work we have exploited the 2C-LII technique with the development of a two-dimensional imaging arrangement. By utilizing an IR pulsed laser, a laser sheet with sharp edges, and controlled fluence, the maximum soot temperature was verified to be around 4000 K in all the investigated regions of an ethylene diffusion flame. The calibrationfree 2D 2C-LII arrangement was then feasible and applied for soot imaging. Verification of the soot volume fraction measurements was carried out by comparison with other techniques such as ''point'' 2C-LII, laser extinction, 2D extinction, and 2D two-color emission techniques. Agreements and some discrepancies are discussed.
2D soot volume fraction imaging in an ethylene diffusion flame by two-color laser induced incandescence (2C-LII) technique and comparison with results from other optical diagnostics
De Iuliis S;Migliorini F;Cignoli F;Zizak G
2007
Abstract
The two-color laser-induced incandescence (2C-LII) technique can be used for soot volume fraction measurements with no use of a reference flame of known soot concentration. In this work we have exploited the 2C-LII technique with the development of a two-dimensional imaging arrangement. By utilizing an IR pulsed laser, a laser sheet with sharp edges, and controlled fluence, the maximum soot temperature was verified to be around 4000 K in all the investigated regions of an ethylene diffusion flame. The calibrationfree 2D 2C-LII arrangement was then feasible and applied for soot imaging. Verification of the soot volume fraction measurements was carried out by comparison with other techniques such as ''point'' 2C-LII, laser extinction, 2D extinction, and 2D two-color emission techniques. Agreements and some discrepancies are discussed.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
