The abatement of iopamidol (IPM), an X-ray iodinated contrast agent, in aqueous solution using powdered activated carbon (PAC) as a sorbent was investigated in the present work. The material was characterized by various analytical techniques such as thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, Brunauer-Emmett-Teller analysis, dynamic light scattering, and zeta potential measurements. Both thermodynamic and kinetic experiments were conducted in a batch apparatus, and the effects of the initial concentration of IPM, the temperature, and the adsorbent bulk density on the adsorption kinetics were investigated. The adsorption isotherms were interpreted well using the Langmuir model. Moreover, it was demonstrated that IPM adsorption on PAC is spontaneous and exothermic (?H0 = -27 kJ mol-1). The adsorption kinetic data were described using a dynamic intraparticle model for fluid-solid adsorption kinetics (ADIM) allowing determination of a surface activation energy Es = 6 ± 1 kJ mol-1. Comparing the experimental results and the model predictions, a good model fit was obtained.
Iopamidol abatement from water: a rigorous approach to determine physicochemical parameters needed to scale up from batch to continuous operation
2023
Abstract
The abatement of iopamidol (IPM), an X-ray iodinated contrast agent, in aqueous solution using powdered activated carbon (PAC) as a sorbent was investigated in the present work. The material was characterized by various analytical techniques such as thermogravimetric analysis, scanning electron microscopy, transmission electron microscopy, Brunauer-Emmett-Teller analysis, dynamic light scattering, and zeta potential measurements. Both thermodynamic and kinetic experiments were conducted in a batch apparatus, and the effects of the initial concentration of IPM, the temperature, and the adsorbent bulk density on the adsorption kinetics were investigated. The adsorption isotherms were interpreted well using the Langmuir model. Moreover, it was demonstrated that IPM adsorption on PAC is spontaneous and exothermic (?H0 = -27 kJ mol-1). The adsorption kinetic data were described using a dynamic intraparticle model for fluid-solid adsorption kinetics (ADIM) allowing determination of a surface activation energy Es = 6 ± 1 kJ mol-1. Comparing the experimental results and the model predictions, a good model fit was obtained.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
