Taking advantage of a large displacement-release experiment on a two-story reinforced concrete building located in Bagnoli (Naples, Italy), we performed free-field measurements using 3D seismometers, accelerometers, and a 100-m-long vertical array. The ground motion was noticeable: near the building, the acceleration exceeded 5% g. At each measurement point, it was possible to recognize two source terms, due to the tested building and to the reaction structure. The two sources generated different wave trains. High-frequency accelerations propagated as Rayleigh waves, whereas 1-2 Hz waves carrying most of the displacement propagated only as body waves. The experiment lends further support to the hypothesis that buildings are able to modify substantially the free-field ground motion in their proximity: the peak ground acceleration we observed is the 20% of the ground acceleration required to produce a displacement on the building equal to the one imposed during the release test. We recognize, however, the difficulty of a realistic modeling of wave propagation in the topmost layer of a densely urbanized area.
Buildings as a seismic source: Analysis of a release test at Bagnoli, Italy
Gallipoli MR;
2006
Abstract
Taking advantage of a large displacement-release experiment on a two-story reinforced concrete building located in Bagnoli (Naples, Italy), we performed free-field measurements using 3D seismometers, accelerometers, and a 100-m-long vertical array. The ground motion was noticeable: near the building, the acceleration exceeded 5% g. At each measurement point, it was possible to recognize two source terms, due to the tested building and to the reaction structure. The two sources generated different wave trains. High-frequency accelerations propagated as Rayleigh waves, whereas 1-2 Hz waves carrying most of the displacement propagated only as body waves. The experiment lends further support to the hypothesis that buildings are able to modify substantially the free-field ground motion in their proximity: the peak ground acceleration we observed is the 20% of the ground acceleration required to produce a displacement on the building equal to the one imposed during the release test. We recognize, however, the difficulty of a realistic modeling of wave propagation in the topmost layer of a densely urbanized area.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
