In the context of the ATHENA X-IFU Cryogenic AntiCoincidence detector (CryoAC) development, we have studied the thermalization properties of a 2 × 2 mm SQUID chip. The chip is glued on a front-end PCB and operated on the cold stage of a dilution refrigerator (TBASE < 20 mK). We performed thermal conductance measurements by using different materials to glue the SQUID chip on the PCB. These have been repeated in subsequent cryostat runs, to highlight degradation effects due to thermal cycles. Here, we present the results obtained by glues and greases widely used in cryogenic environments, i.e., GE 7031 Varnish Glue, Apiezon N Grease and Rubber Cement.
Thermalization of a SQUID Chip at Cryogenic Temperature: Thermal Conductance Measurement for GE 7031 Varnish Glue, Apiezon N Grease and Rubber Cement Between 20 and 200 mK
D'Andrea, M.;Torrioli, G.;
2024
Abstract
In the context of the ATHENA X-IFU Cryogenic AntiCoincidence detector (CryoAC) development, we have studied the thermalization properties of a 2 × 2 mm SQUID chip. The chip is glued on a front-end PCB and operated on the cold stage of a dilution refrigerator (TBASE < 20 mK). We performed thermal conductance measurements by using different materials to glue the SQUID chip on the PCB. These have been repeated in subsequent cryostat runs, to highlight degradation effects due to thermal cycles. Here, we present the results obtained by glues and greases widely used in cryogenic environments, i.e., GE 7031 Varnish Glue, Apiezon N Grease and Rubber Cement.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
