Abstract: In this work, the removal of sulfamethoxazole from water was studied by adsorption on a cyclodextrin–epichlorohydrin copolymer and through Advanced Oxidation Processes. The adsorption was efficient and fast, requiring only 10 min to reach the equilibrium; it was also highly favored, with adsorption efficiency higher than 80%, at slightly acidic pH and at room temperature. The desorption of sulfamethoxazole was obtained by raising the temperature to 80 °C. The regenerated polymer has been reused multiple times without any loss in performance, allowing a reduction in costs associated with the process. As an alternative method to regenerate the adsorbent material, the photodegradation of sulfamethoxazole adsorbed on the polymer alone and in the presence of TiO2 as a catalyst through continuous irradiation with UV light and Pulsed Light was attempted and studied. For this purpose, polymeric adsorbents containing different amounts of TiO2 were synthesized and tested. The Pulsed Light showed the highest efficiency since it allowed the complete removal of sulfamethoxazole, regardless of the presence of TiO2 which, however, reduces adsorption efficiency of the material. Furthermore, a qualitative assessment of formed pulsed light by-products was also attempted. The remains of SMX in solution were decomposed by Pulsed Light technology and the effect of the presence of hydrogen peroxide on the photodegradation process was also studied. Despite the presence of by-products after Advanced Oxidation Processes, the procedure proposed in this work is effective and easy to apply to water treatment plants, thanks to the use of environmental-friendly adsorbents and light sources. Graphical abstract: [Figure not available: see fulltext.]
The synergistic action of cyclodextrin-based adsorbent and advanced oxidation processes for sulfamethoxazole removal from water
Gubitosa, J.;Cosma, P.;Fini, P.
2022
Abstract
Abstract: In this work, the removal of sulfamethoxazole from water was studied by adsorption on a cyclodextrin–epichlorohydrin copolymer and through Advanced Oxidation Processes. The adsorption was efficient and fast, requiring only 10 min to reach the equilibrium; it was also highly favored, with adsorption efficiency higher than 80%, at slightly acidic pH and at room temperature. The desorption of sulfamethoxazole was obtained by raising the temperature to 80 °C. The regenerated polymer has been reused multiple times without any loss in performance, allowing a reduction in costs associated with the process. As an alternative method to regenerate the adsorbent material, the photodegradation of sulfamethoxazole adsorbed on the polymer alone and in the presence of TiO2 as a catalyst through continuous irradiation with UV light and Pulsed Light was attempted and studied. For this purpose, polymeric adsorbents containing different amounts of TiO2 were synthesized and tested. The Pulsed Light showed the highest efficiency since it allowed the complete removal of sulfamethoxazole, regardless of the presence of TiO2 which, however, reduces adsorption efficiency of the material. Furthermore, a qualitative assessment of formed pulsed light by-products was also attempted. The remains of SMX in solution were decomposed by Pulsed Light technology and the effect of the presence of hydrogen peroxide on the photodegradation process was also studied. Despite the presence of by-products after Advanced Oxidation Processes, the procedure proposed in this work is effective and easy to apply to water treatment plants, thanks to the use of environmental-friendly adsorbents and light sources. Graphical abstract: [Figure not available: see fulltext.]I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
