The growth of ZnTe by atmospheric pressure metalorganic vapour phase epitaxy on (100)ZnTe:P substrates is reported. The epilayers were grown at 340°C after in situ H2 heat cleaning of the substrate for surface oxide removal. Secondary ion mass spectrometry analysis of as-grown samples has shown that in situ treatment temperatures above 240°C are necessary. Moreover, no phosphorous incorporation occurs in the epilayers by either diffusion from the substrate or auto-doping through the vapour. Carbon is instead incorporated in the epilayers at concentrations higher than in the substrate. 4.2K photoluminescence (PL) measurements show a dominant band edge emission, whose main component at 2.3809eV is identified, by comparison with reflectance spectra, with the 1s-state free exciton line, its FWHM being 2.2meV. A weak 2s-state exciton line also appears on the high-energy side of the ground-state emission, further confirming the high optical quality and purity of the epilayers. Donor and acceptor bound exciton lines are also identified within the band edge region, whilst free-to-bound and donor–acceptor pair bands below 2.37eV in the PL spectra are ascribed to luminescence from the substrate.

MOVPE growth and characterization of znte epilayers on (100) znte:P substrates

2002

Abstract

The growth of ZnTe by atmospheric pressure metalorganic vapour phase epitaxy on (100)ZnTe:P substrates is reported. The epilayers were grown at 340°C after in situ H2 heat cleaning of the substrate for surface oxide removal. Secondary ion mass spectrometry analysis of as-grown samples has shown that in situ treatment temperatures above 240°C are necessary. Moreover, no phosphorous incorporation occurs in the epilayers by either diffusion from the substrate or auto-doping through the vapour. Carbon is instead incorporated in the epilayers at concentrations higher than in the substrate. 4.2K photoluminescence (PL) measurements show a dominant band edge emission, whose main component at 2.3809eV is identified, by comparison with reflectance spectra, with the 1s-state free exciton line, its FWHM being 2.2meV. A weak 2s-state exciton line also appears on the high-energy side of the ground-state emission, further confirming the high optical quality and purity of the epilayers. Donor and acceptor bound exciton lines are also identified within the band edge region, whilst free-to-bound and donor–acceptor pair bands below 2.37eV in the PL spectra are ascribed to luminescence from the substrate.
2002
Istituto per la Microelettronica e Microsistemi - IMM
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.14243/52511
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact