Nineteen samples of medieval transparent-glazed pottery and archaic majolica from Orvieto (central Italy) were studied. they were classified by archaeological criterion as follows: five transparent-glazed fragments with green and brown decorations (first half of the 13th century), eight green transparent-glazed fragments (13th century). SEM-EDX, XRD (the Rietveld method) and XRF were used to characterise the chemical and mineralogical compositions both of the bodies and the coatings. In all of the samples, the paste is Ca-rich with CaO contents as high as 13-20 wt%. The mineralogical composition is compatible with a firing temperature about 950°C, which is the typical temperature reached in a wood kiln. No difference was observed between the bodies of transparent-and tin-glazed pottery. In the case of transparent glazes, the burial conditions lead to heavy weathering of the samples. However, on the basis of the analyses carried out innon-weathered areas, the typical composiztion is PbO 55-65 wt%, SiO2 31-35 wt%. In tin glazes, the tin is scattered on the mass of the glaze as SnO2 crystals with a concentration of 7-14 wt%. Concerning the decorations, it is established that the green colour is due to the presence of copper; while the manganese is responsible for the brown colour. These pigments, which repersent the typical colours of "archaic majolica", are spread through the glaze homogeneously, apart from one case in which there is clear evidence of manganese oxide crystals.
a study on late Medieval transparent-glazed pottery and archaic majolica from Orvieto (central Italy)
Fabbri B;
2005
Abstract
Nineteen samples of medieval transparent-glazed pottery and archaic majolica from Orvieto (central Italy) were studied. they were classified by archaeological criterion as follows: five transparent-glazed fragments with green and brown decorations (first half of the 13th century), eight green transparent-glazed fragments (13th century). SEM-EDX, XRD (the Rietveld method) and XRF were used to characterise the chemical and mineralogical compositions both of the bodies and the coatings. In all of the samples, the paste is Ca-rich with CaO contents as high as 13-20 wt%. The mineralogical composition is compatible with a firing temperature about 950°C, which is the typical temperature reached in a wood kiln. No difference was observed between the bodies of transparent-and tin-glazed pottery. In the case of transparent glazes, the burial conditions lead to heavy weathering of the samples. However, on the basis of the analyses carried out innon-weathered areas, the typical composiztion is PbO 55-65 wt%, SiO2 31-35 wt%. In tin glazes, the tin is scattered on the mass of the glaze as SnO2 crystals with a concentration of 7-14 wt%. Concerning the decorations, it is established that the green colour is due to the presence of copper; while the manganese is responsible for the brown colour. These pigments, which repersent the typical colours of "archaic majolica", are spread through the glaze homogeneously, apart from one case in which there is clear evidence of manganese oxide crystals.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
