Nanoscale structures have been recently proposed as charge storage nodes due to their potential applications for future nanoscale memory devices. Our approach is based on the idea of using Si nanodots as discrete floating gates. To experimentally investigate such potential, we have fabricated MOS structures with Si nanocrystals. The dots have been deposited onto an ultra-thin tunnel oxide by chemical vapor deposition (CVD) of SiH4, and then annealed at 1000 degreesC for 40 s, to crystallize all the dots. After deposition, the dots have been covered by a CVD SiO2 layer, thus resulting completely embedded into stoichiometric silicon oxide. The nanocrystal density and size have been studied by energy filtered TEM (EFTEM) analysis. An electrostatic force microscope has been used to locally inject and image charge. By applying a relatively large tip voltage and reducing the tip to sample separation down to the contact with the surface sample, a few dots have been charged, by appearing as protrusions on the surface. The charged dots have been monitored for up to 30 min, by showing no discharge effects either vertically, through the double barrier of oxide layers, or laterally, via cross talk effect between other close dots.
Imaging of Si quantum dots as charge storage nodes
Puglisi RA;Lombardo S;Nicotra G;
2003
Abstract
Nanoscale structures have been recently proposed as charge storage nodes due to their potential applications for future nanoscale memory devices. Our approach is based on the idea of using Si nanodots as discrete floating gates. To experimentally investigate such potential, we have fabricated MOS structures with Si nanocrystals. The dots have been deposited onto an ultra-thin tunnel oxide by chemical vapor deposition (CVD) of SiH4, and then annealed at 1000 degreesC for 40 s, to crystallize all the dots. After deposition, the dots have been covered by a CVD SiO2 layer, thus resulting completely embedded into stoichiometric silicon oxide. The nanocrystal density and size have been studied by energy filtered TEM (EFTEM) analysis. An electrostatic force microscope has been used to locally inject and image charge. By applying a relatively large tip voltage and reducing the tip to sample separation down to the contact with the surface sample, a few dots have been charged, by appearing as protrusions on the surface. The charged dots have been monitored for up to 30 min, by showing no discharge effects either vertically, through the double barrier of oxide layers, or laterally, via cross talk effect between other close dots.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.