The synthetic mechanism of uniformly dispersed Cu-nanocluster doped (0.051.0 wt%) silica glasses (copper ruby glasses) was investigated by UVVIS and FTIR spectroscopy, DSC, XRD, surface area and density measurements at different stages of drying/densification up to glass formation. The monolithic gels were prepared from Cu(NO3)2, 2N(CH2)2NH(CH2)3Si(OCH3)3 (DAMO) and acid hydrolysed Si(OC2H5)4 (TEOS). DAMO was used to immobilize the Cu2z ions in the silica matrix. The formation and decomposition of CuDAMO complexes in the silica gel monoliths were studied. The doped gels were densified under H2 and He gas atmospheres. A maximum matrix (SiO2) density of 1.701.73 g cm23 (7779% of the theoretical density) could be achieved in an H2 atmosphere at 900 uC. However a density close to silica glass 2.17 g cm23 (w98.5% of theoretical) was achieved when the gels were densified in H2 up to 800 uC followed by He gas at 980 uC. The surface area data also confirmed this densification behaviour. Uniformly dispersed Cu metal nanoclusters were formed during the heat-treatment of the gels and as a result a surface plasmon (SP) band of Cu-nanoclusters (563580 nm) was observed. The increase of heat-treatment temperature caused the growth of nanoclusters and as a consequence the SP band was blue-shifted. XRD data also confirmed this.
Preparation of uniformly dispersed copper nanocluster doped silica
Epifani M;
2001
Abstract
The synthetic mechanism of uniformly dispersed Cu-nanocluster doped (0.051.0 wt%) silica glasses (copper ruby glasses) was investigated by UVVIS and FTIR spectroscopy, DSC, XRD, surface area and density measurements at different stages of drying/densification up to glass formation. The monolithic gels were prepared from Cu(NO3)2, 2N(CH2)2NH(CH2)3Si(OCH3)3 (DAMO) and acid hydrolysed Si(OC2H5)4 (TEOS). DAMO was used to immobilize the Cu2z ions in the silica matrix. The formation and decomposition of CuDAMO complexes in the silica gel monoliths were studied. The doped gels were densified under H2 and He gas atmospheres. A maximum matrix (SiO2) density of 1.701.73 g cm23 (7779% of the theoretical density) could be achieved in an H2 atmosphere at 900 uC. However a density close to silica glass 2.17 g cm23 (w98.5% of theoretical) was achieved when the gels were densified in H2 up to 800 uC followed by He gas at 980 uC. The surface area data also confirmed this densification behaviour. Uniformly dispersed Cu metal nanoclusters were formed during the heat-treatment of the gels and as a result a surface plasmon (SP) band of Cu-nanoclusters (563580 nm) was observed. The increase of heat-treatment temperature caused the growth of nanoclusters and as a consequence the SP band was blue-shifted. XRD data also confirmed this.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
