Simulations of the stationary Q = 10 and the exit phase from the flat-top of an ITER 15MA baseline scenario: predictive JINTRAC simulation with a consistent treatment of D and T in the whole plasma

Designing a robust termination scenario for a burning ITER plasma is a challenge that requires extensive core plasma and divertor modelling. The presented work consists of coupled core/edge/SOL/divertor simulations, performed with the JINTRAC code, to study the Q = 10 flat-top phase and exit phase of the ITER 15 MA/5.3 T DT scenario. The modelling utilizes the recently implemented option to treat deuterium and tritium separately in the SOL/divertor, enabling a consistent treatment of deuterium and tritium in the whole plasma volume, which is a unique capability of JINTRAC. In addition, these are the first JINTRAC simulations of this scenario that use a first-principles transport model to self-consistently model the ECRH power deposition and to include tungsten while keeping track of tungsten sputtering and accumulation. The flat-top simulations demonstrate the possibility of sustaining a steady state fusion Q of 10 using pure deuterium gas puffs together with DT mixed pellets, which is an option to make a more effective use of tritium. Simulations of the exit phase are set up sequentially, with each phase providing initial conditions for the next, starting with a density decay at full current and auxiliary power, and demonstrate the possibility of reducing the density robustly within a few seconds. Following the density decay, a subsequent auxiliary power ramp-down in H-mode is performed with a late H-L transition at low auxiliary power, which may provide an option for the optimization of the plasma termination. The final ramp-down phase consists of a current ramp-down in L-mode to 3.75 MA.