Access and sustainment of ELMy H-mode operation for ITER pre-fusion power operation plasmas using JINTRAC

In the initial stages of ITER operation, ELM mitigation systems need to be commissioned. This requires controlled flat-top operation in type-I ELMy H-mode regimes. Hydrogen or helium plasma discharges are used exclusively in these stages to ensure negligible production of neutrons from fusion reactions. With the expected higher L-H power threshold of hydrogen and helium plasmas compared to corresponding D and D/T plasmas, it is uncertain whether available auxiliary power systems are sufficient to operate in stable type-I ELMy H-mode. This has been investigated using integrated core and edge/SOL/divertor modelling with JINTRAC. Assuming that the L-H power threshold is well captured by the Martin08 scaling law, the presented simulations have found that 30 MW of ECRH power is likely required for the investigated hydrogen plasma scenarios, rather than the originally planned 20 MW in the 2016 Staged Approach ITER Baseline. However, past experiments have shown that a small helium fraction (∼10%) can considerably reduce the hydrogen plasma L-H power threshold. Assuming that these results extrapolate to ITER operation regimes, the 7.5 MA/2.65 T hydrogen plasma scenario is likely to access stable type-I ELMy H-mode operation also at 20 MW of ECRH.