A coupled zero-dimensional (0D) thermodynamic and three-dimensional (3D) Computational Fluid Dynamics (CFD) analysis of an Exhaust Gas Recirculation (EGR)-modified AE T100 micro gas turbine (MGT) fueled by biogas with optional hydrogen enrichment for cogenerative applications is here presented. The validated numerical models investigate off-design performance across EGR ratios from 0% to 90%, hydrogen volumetric fractions up to 20%, and rotational speeds between 64.000 and 70.000 RPM. The 0D analysis reveals that high EGR operation up to 75% achieves a peak of 29.2% of electrical efficiency at 67.000 RPM, representing a 3.7% decrement over baseline conditions at same speed (0% EGR), while exhaust CO2 concentrations increase to 12.8–13.6% by volume. Moreover, the CFD results identify critical combustion constraints: EGR above 70% shifts peak temperatures into the combustor core, reducing efficiency as inert gas content delays flame propagation, with model discrepancies exceeding 4% beyond 80% EGR. CO emissions reach regulatory limits of 100 mg/Nm3 (15% O2) at 75% EGR (123.3 mg/Nm3), establishing this as the practical operability boundary; however, increasing pilot fuel fraction from 7% to 10% reduces emissions while maintaining temperature control. Hydrogen enrichment to 15% vol. dramatically cuts CO to 40 mg/Nm3 and shortens flame length, though 20% triggers flashback in swirler conduits. Maximum biogas mass flow is constrained to 17 g/s to prevent supersonic injector conditions.

Off Design Analysis of an EGR Micro Gas Turbine Supplied by Various Fuels for Cogenerative Applications

Fabrizio Reale
Primo
;
Daniele Piazzullo;Raffaele Carandente;Patrizio Massoli
2026

Abstract

A coupled zero-dimensional (0D) thermodynamic and three-dimensional (3D) Computational Fluid Dynamics (CFD) analysis of an Exhaust Gas Recirculation (EGR)-modified AE T100 micro gas turbine (MGT) fueled by biogas with optional hydrogen enrichment for cogenerative applications is here presented. The validated numerical models investigate off-design performance across EGR ratios from 0% to 90%, hydrogen volumetric fractions up to 20%, and rotational speeds between 64.000 and 70.000 RPM. The 0D analysis reveals that high EGR operation up to 75% achieves a peak of 29.2% of electrical efficiency at 67.000 RPM, representing a 3.7% decrement over baseline conditions at same speed (0% EGR), while exhaust CO2 concentrations increase to 12.8–13.6% by volume. Moreover, the CFD results identify critical combustion constraints: EGR above 70% shifts peak temperatures into the combustor core, reducing efficiency as inert gas content delays flame propagation, with model discrepancies exceeding 4% beyond 80% EGR. CO emissions reach regulatory limits of 100 mg/Nm3 (15% O2) at 75% EGR (123.3 mg/Nm3), establishing this as the practical operability boundary; however, increasing pilot fuel fraction from 7% to 10% reduces emissions while maintaining temperature control. Hydrogen enrichment to 15% vol. dramatically cuts CO to 40 mg/Nm3 and shortens flame length, though 20% triggers flashback in swirler conduits. Maximum biogas mass flow is constrained to 17 g/s to prevent supersonic injector conditions.
2026
Istituto di Scienze e Tecnologie per l'Energia e la Mobilità Sostenibili - STEMS
978-0-7918-8976-3
micro gas turbines, 0D, CFD, EGR, biogas
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.14243/606741
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ente

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact