A simple method for the full characterization of passive n-port MMIC structures using standard 2-port Vector Network Analyzer (VNA) measurements is presented. Its main advantages are: it does not require to perform measurements from all the ports of the network, no special calibration procedure is needed, the auxiliary terminations required by the procedure can be integrated at the border of the structure under test with minimal area increase, and it can be easily implemented in commercial CAD software. The method was applied to a 9- port microstrip structure corresponding to the output power combiner and impedance matching network of an X-band MMIC Power Amplifier (HPA). The full S-parameter matrix was derived from 2-port measurements and compared to circuit as well as EM-based simulations of the structure.
On wafer multi-port linear characterization of passive structures using a standard 2-port VNA
R P Paganelli
2010
Abstract
A simple method for the full characterization of passive n-port MMIC structures using standard 2-port Vector Network Analyzer (VNA) measurements is presented. Its main advantages are: it does not require to perform measurements from all the ports of the network, no special calibration procedure is needed, the auxiliary terminations required by the procedure can be integrated at the border of the structure under test with minimal area increase, and it can be easily implemented in commercial CAD software. The method was applied to a 9- port microstrip structure corresponding to the output power combiner and impedance matching network of an X-band MMIC Power Amplifier (HPA). The full S-parameter matrix was derived from 2-port measurements and compared to circuit as well as EM-based simulations of the structure.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
