The synthesis of sulphonated polysulphone (PSF) with three different sulphonation levels was carried out and several membranes were developed with the corresponding polymers.The membranes were characterised in terms of ion exchange capacity (IEC), water up-take at different temperatures, TG-DSC analysis, FT-IR investigation and methanol permeability measurements. The results obtained were correlated to the electrochemical data. Electrochemical tests in a single cell fed with H2/air were also carried out in the temperature range 80-120 1C and compared to commercial Nafion 112 (N112). The chemical-physical properties of the tested membranes have good reproducibility and comparable values with commercial Nafion. A maximum power density of about 360mWcm2 for PSF 48% at 0.6V and T ¼ 120 1C was obtained, and the measured OCV value for the PSF membrane is higher than the perfluorinated membrane with a comparable thickness, indicating a lower gas permeability of PSF polymer.

Sulphonated polysulphone membranes for medium temperature in polymer electrolyte fuel cells (PEFC)

R Pedicini
Primo
Writing – Review & Editing
;
A Carbone;A Saccà;I Gatto;G Di Marco;E Passalacqua
2008

Abstract

The synthesis of sulphonated polysulphone (PSF) with three different sulphonation levels was carried out and several membranes were developed with the corresponding polymers.The membranes were characterised in terms of ion exchange capacity (IEC), water up-take at different temperatures, TG-DSC analysis, FT-IR investigation and methanol permeability measurements. The results obtained were correlated to the electrochemical data. Electrochemical tests in a single cell fed with H2/air were also carried out in the temperature range 80-120 1C and compared to commercial Nafion 112 (N112). The chemical-physical properties of the tested membranes have good reproducibility and comparable values with commercial Nafion. A maximum power density of about 360mWcm2 for PSF 48% at 0.6V and T ¼ 120 1C was obtained, and the measured OCV value for the PSF membrane is higher than the perfluorinated membrane with a comparable thickness, indicating a lower gas permeability of PSF polymer.
2008
Istituto di Tecnologie Avanzate per l'Energia - ITAE
Sulphonated polysulphone; Membrane preparation; Physico-chemical characterisations; Polymer electrolyte fuel cells
File in questo prodotto:
File Dimensione Formato  
prod_55411-doc_4168.pdf

accesso aperto

Descrizione: Sulphonated polysulphone membranes for medium temperature
Tipologia: Versione Editoriale (PDF)
Licenza: Creative commons
Dimensione 450.92 kB
Formato Adobe PDF
450.92 kB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.14243/76372
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 34
  • ???jsp.display-item.citation.isi??? 31
social impact