We have investigated the effect of manganese (Mn) doping on properties of nanosized biphasic calcium phosphate powders and their dense bodies. Manganese levels of 0.6, 1.3, 1.9, 4.3, 7.0 and 11.9 at.% were successfully incorporated into biphasic calcium phosphate via a sol-gel route. The prepared powders were calcined at temperatures of 500-1200°C. The X-ray diffraction analysis revealed that a mix phase comprising of hydroxyapatite and b-tricalcium phosphate were present, however the content of each phases in the structure was affected by the Mn content. The studies found that the largest portion of b-tricalcium phosphate was detected at 4.3 at.% Mn doping. The incorporation of Mn has also greatly increased the crystallinity of the biphasic calcium phosphate powder due to progressive densification of particles. Characterization on their sintered dense bodies showed that manganese concentration affected the physical properties of the dense bodies. The highest density was found for 4.3 at.% Mn doped biphasic calcium phosphate sintered at 1300°C

Effects of manganese doping on properties of sol-gel derived biphasic calcium phosphate ceramics

Sprio Simone;Tampieri Anna;
2011

Abstract

We have investigated the effect of manganese (Mn) doping on properties of nanosized biphasic calcium phosphate powders and their dense bodies. Manganese levels of 0.6, 1.3, 1.9, 4.3, 7.0 and 11.9 at.% were successfully incorporated into biphasic calcium phosphate via a sol-gel route. The prepared powders were calcined at temperatures of 500-1200°C. The X-ray diffraction analysis revealed that a mix phase comprising of hydroxyapatite and b-tricalcium phosphate were present, however the content of each phases in the structure was affected by the Mn content. The studies found that the largest portion of b-tricalcium phosphate was detected at 4.3 at.% Mn doping. The incorporation of Mn has also greatly increased the crystallinity of the biphasic calcium phosphate powder due to progressive densification of particles. Characterization on their sintered dense bodies showed that manganese concentration affected the physical properties of the dense bodies. The highest density was found for 4.3 at.% Mn doped biphasic calcium phosphate sintered at 1300°C
2011
Istituto di Scienza, Tecnologia e Sostenibilità per lo Sviluppo dei Materiali Ceramici - ISSMC (ex ISTEC)
Mechanical properties
Biphasic calcium phosphate
Manganese doping
Sol-gel
Physical properties
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/20.500.14243/9950
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact