QUARANTA, FABIO
QUARANTA, FABIO
Istituto per la Microelettronica e Microsistemi - IMM - Sede Secondaria Lecce
Crafting at the nanoscale: A comprehensive review of mechanical Atomic force microscopy-based lithography methods and their evolution
2024 Vincenti, L.; Pellegrino, P.; Cascione, M.; De Matteis, V.; Farella, I.; Quaranta, F.; Rinaldi, R.
Morphological and Mechanical Variations in E. coli Induced by PMMA Nanostructures Patterned via Electron Beam Lithography: an Atomic Force Microscopy Study
2024 Pellegrino, Paolo; Farella, Isabella; De Matteis, Valeria; Cascione, Mariafrancesca; Calcagnile, Matteo; Villani, Stefania; Vincenti, Lorenzo; Alifano, Pietro; Quaranta, Fabio; Rinaldi, Rosaria
Improvement of the piezoelectric response of AlN thin films through the evaluation of the contact surface potential by piezoresponse force microscopy
2023 Signore, M. A.; Francioso, L.; De Pascali, C.; Serra, A.; Manno, D.; Rescio, G.; Quaranta, F.; Melissano, E.; Velardi, L.
Low-Temperature Thin Film Encapsulation for MEMS With Silicon Nitride/Chromium Cap
2023 Persano, A.; Bagolini, A.; Iannacci, J.; Novel, D.; Campa, A.; Quaranta, F.
A wearable and smart actuator for haptic stimulation
2022 Fersurella, G.; Della Torre, A.; Quaranta, F.; Losito, P.; D'Alessandro, L.; Invitto, S.; Rinaldi, R.
Effect of silicon-based substrates and deposition type on sputtered AlN thin films: Physical & chemical properties and suitability for piezoelectric device integration
2022 Signore, M. A.; Velardi, L.; De Pascali, C.; Kuznetsova, I.; Blasi, L.; Biscaglia, F.; Quaranta, F.; Siciliano, P.; Francioso, L.
Investigation of the Effects of Pulse-Atomic Force Nanolithography Parameters on 2.5D Nanostructures’ Morphology
2022 Pellegrino, P.; Farella, I.; Cascione, M.; De Matteis, V.; Bramanti, A. P.; Della Torre, A.; Quaranta, F.; Rinaldi, R.
Pile-Ups Formation in AFM-Based Nanolithography: Morpho-Mechanical Characterization and Removal Strategies
2022 Pellegrino, P.; Farella, I.; Cascione, M.; De Matteis, V.; Bramanti, A. P.; Vincenti, L.; Della Torre, A.; Quaranta, F.; Rinaldi, R.
Pulse-Atomic Force Lithography: A Powerful Nanofabrication Technique to Fabricate Constant and Varying-Depth Nanostructures
2022 Pellegrino, Paolo; Paolo Bramanti, Alessandro; Farella, Isabella; Cascione, Mariafrancesca; De Matteis, Valeria; DELLA TORRE, Antonio; Quaranta, Fabio; Rinaldi, Rosaria
Thin Film Encapsulation for RF MEMS in 5G and Modern Telecommunication Systems
2020 Persano, Anna; Quaranta, Fabio; Taurino, Antonietta; Siciliano, PIETRO ALEARDO; Iannacci, Jacopo
Fabrication and characterization of AlN-based flexible piezoelectric pressure sensor integrated into an implantable artificial pancreas
2019 Signore, M. A.; Rescio, G.; De Pascali, C.; Iacovacci, V.; Dario, P.; Leone, A.; Quaranta, F.; Taurino, A.; Siciliano, P.; Francioso, L.
Out-of-plane deformation and pull-in voltage of cantilevers with residual stress gradient: experiment and modelling
2019 Anna Persano; Jacopo Iannacci; Pietro Siciliano; Fabio Quaranta
Effects of polymer matrices and carbon nanotubes on the generation of electric energy in a microbial fuel cell
2018 Plekhanova, Y; Tarasov, S; Kolesov, V; Kuznetsova, I; Signore, M; Quaranta, F; Reshetilov, A
Wafer-level micropackaging in thin film technology for RF MEMS applications
2018 Persano, A; Siciliano, P; Quaranta, F; Taurino, A; Lucibello, A; Marcelli, R; Capoccia, G; Proietti, E; Bagolini, A; Iannacci, J
Growth assessment of (002)-oriented AN thin films on Ti bottom electrode deposited on silicon and kapton substrates
2017 Signore, M A; Taurino, A; Catalano, M; Kim, M; Che, Z; Quaranta, F; Siciliano, P
Influence of design and fabrication on RF performance of capacitive RF MEMS switches
2016 Persano A.; Quaranta F.; Capoccia G.; Proietti E.; Lucibello A.; Marcelli R.; Bagolini A.; Iannacci J.; Taurino A.; Siciliano P.
Anomalous capacitance enhancement triggered by light
2015 Dianat, P; Persano, A; Quaranta, F; Cola, A; Nabet, B
Improving holographic reconstruction by automatic Butterworth filtering for microelectromechanical systems characterization
2015 Matrecano, M; Memmolo, P; Miccio, L; Persano, A; Quaranta, F; Siciliano, P; Ferraro, P
On the electrostatic actuation of capacitive RF MEMS switches on GaAs substrate
2015 Persano, A; Quaranta, F; Martucci, Mc; Siciliano, P; Cola, A
Role of oxygen contaminant on the physical properties of sputtered AlN thin films
2015 Signore, M A; Taurino, A; Valerini, D; Rizzo, A; Farella, I; Catalano, M; Quaranta, F; Siciliano, P
| Titolo | Data di pubblicazione | Autore(i) | File |
|---|---|---|---|
| Crafting at the nanoscale: A comprehensive review of mechanical Atomic force microscopy-based lithography methods and their evolution | 1-gen-2024 | Vincenti, L.; Pellegrino, P.; Cascione, M.; De Matteis, V.; Farella, I.; Quaranta, F.; Rinaldi, R. | |
| Morphological and Mechanical Variations in E. coli Induced by PMMA Nanostructures Patterned via Electron Beam Lithography: an Atomic Force Microscopy Study | 1-gen-2024 | Pellegrino, Paolo; Farella, Isabella; De Matteis, Valeria; Cascione, Mariafrancesca; Calcagnile, Matteo; Villani, Stefania; Vincenti, Lorenzo; Alifano, Pietro; Quaranta, Fabio; Rinaldi, Rosaria | |
| Improvement of the piezoelectric response of AlN thin films through the evaluation of the contact surface potential by piezoresponse force microscopy | 1-gen-2023 | Signore, M. A.; Francioso, L.; De Pascali, C.; Serra, A.; Manno, D.; Rescio, G.; Quaranta, F.; Melissano, E.; Velardi, L. | |
| Low-Temperature Thin Film Encapsulation for MEMS With Silicon Nitride/Chromium Cap | 1-gen-2023 | Persano, A.; Bagolini, A.; Iannacci, J.; Novel, D.; Campa, A.; Quaranta, F. | |
| A wearable and smart actuator for haptic stimulation | 1-gen-2022 | Fersurella, G.; Della Torre, A.; Quaranta, F.; Losito, P.; D'Alessandro, L.; Invitto, S.; Rinaldi, R. | |
| Effect of silicon-based substrates and deposition type on sputtered AlN thin films: Physical & chemical properties and suitability for piezoelectric device integration | 1-gen-2022 | Signore, M. A.; Velardi, L.; De Pascali, C.; Kuznetsova, I.; Blasi, L.; Biscaglia, F.; Quaranta, F.; Siciliano, P.; Francioso, L. | |
| Investigation of the Effects of Pulse-Atomic Force Nanolithography Parameters on 2.5D Nanostructures’ Morphology | 1-gen-2022 | Pellegrino, P.; Farella, I.; Cascione, M.; De Matteis, V.; Bramanti, A. P.; Della Torre, A.; Quaranta, F.; Rinaldi, R. | |
| Pile-Ups Formation in AFM-Based Nanolithography: Morpho-Mechanical Characterization and Removal Strategies | 1-gen-2022 | Pellegrino, P.; Farella, I.; Cascione, M.; De Matteis, V.; Bramanti, A. P.; Vincenti, L.; Della Torre, A.; Quaranta, F.; Rinaldi, R. | |
| Pulse-Atomic Force Lithography: A Powerful Nanofabrication Technique to Fabricate Constant and Varying-Depth Nanostructures | 1-gen-2022 | Pellegrino, Paolo; Paolo Bramanti, Alessandro; Farella, Isabella; Cascione, Mariafrancesca; De Matteis, Valeria; DELLA TORRE, Antonio; Quaranta, Fabio; Rinaldi, Rosaria | |
| Thin Film Encapsulation for RF MEMS in 5G and Modern Telecommunication Systems | 1-gen-2020 | Persano, Anna; Quaranta, Fabio; Taurino, Antonietta; Siciliano, PIETRO ALEARDO; Iannacci, Jacopo | |
| Fabrication and characterization of AlN-based flexible piezoelectric pressure sensor integrated into an implantable artificial pancreas | 1-gen-2019 | Signore, M. A.; Rescio, G.; De Pascali, C.; Iacovacci, V.; Dario, P.; Leone, A.; Quaranta, F.; Taurino, A.; Siciliano, P.; Francioso, L. | |
| Out-of-plane deformation and pull-in voltage of cantilevers with residual stress gradient: experiment and modelling | 1-gen-2019 | Anna Persano; Jacopo Iannacci; Pietro Siciliano; Fabio Quaranta | |
| Effects of polymer matrices and carbon nanotubes on the generation of electric energy in a microbial fuel cell | 1-gen-2018 | Plekhanova, Y; Tarasov, S; Kolesov, V; Kuznetsova, I; Signore, M; Quaranta, F; Reshetilov, A | |
| Wafer-level micropackaging in thin film technology for RF MEMS applications | 1-gen-2018 | Persano, A; Siciliano, P; Quaranta, F; Taurino, A; Lucibello, A; Marcelli, R; Capoccia, G; Proietti, E; Bagolini, A; Iannacci, J | |
| Growth assessment of (002)-oriented AN thin films on Ti bottom electrode deposited on silicon and kapton substrates | 1-gen-2017 | Signore, M A; Taurino, A; Catalano, M; Kim, M; Che, Z; Quaranta, F; Siciliano, P | |
| Influence of design and fabrication on RF performance of capacitive RF MEMS switches | 1-gen-2016 | Persano A.; Quaranta F.; Capoccia G.; Proietti E.; Lucibello A.; Marcelli R.; Bagolini A.; Iannacci J.; Taurino A.; Siciliano P. | |
| Anomalous capacitance enhancement triggered by light | 1-gen-2015 | Dianat, P; Persano, A; Quaranta, F; Cola, A; Nabet, B | |
| Improving holographic reconstruction by automatic Butterworth filtering for microelectromechanical systems characterization | 1-gen-2015 | Matrecano, M; Memmolo, P; Miccio, L; Persano, A; Quaranta, F; Siciliano, P; Ferraro, P | |
| On the electrostatic actuation of capacitive RF MEMS switches on GaAs substrate | 1-gen-2015 | Persano, A; Quaranta, F; Martucci, Mc; Siciliano, P; Cola, A | |
| Role of oxygen contaminant on the physical properties of sputtered AlN thin films | 1-gen-2015 | Signore, M A; Taurino, A; Valerini, D; Rizzo, A; Farella, I; Catalano, M; Quaranta, F; Siciliano, P |